Blog posts tagged with 'structural steel bending profiles'

We recently completed bending some component parts for a customer which were a mix of carbon steel and nickel plate, pipe and bar. In the first image, we bent the coil, the terminals, the cylinder and the cylinder stiffeners. In the second image, we bent the inner and out cylinders on the top half....

Bridge bending? Yes- we bend steel for anything, even bridges! In fact every month steel is leaving our yard for different steel bridge projects. We recently finished bending steel for two bridge projects located on opposite ends of the United States. The first project shipped to Maine and consiste...

Albina recently worked with a loyal customer out of Colorado on the UC Health Highlands Ranch Hospital. The new 85,000 square foot hospital is being built as a proactive approach to the projected 25%+ population increase by 2025 for this growing area of Colorado. Albina needed to bend and ship 40,00...

We were recently involved with some bending for the Digestive Health Institute of Montana, the largest gastrointestinal (GI) medical group in Montana. Approximately 30,000 pounds of bent steel was shipped to Great Falls, MT for fabrication. This project was unique due to the wide range of materials ...

Albina Co., Inc. recently bent 90 pieces of Tube Steel 8" X 4" X .375" WALL A500 GR C the hardway to a complicated “S” configuration. The tightest “S” section that we bent was down to a 59” radius. All of the material was bent cold on our profile rolling equipment. This steel was shipping to a goo...

Albina Co., Inc. recently completed bending 21,000 pounds of curved steel for a Providence Medical Center located in Medford, Oregon. We bent Tube steel 8" X 6" X .250" WALL A500 GR B bent the Easy way to a 22 ft radius, tube steel 6" X 4" X .250" WALL A500 GR B Bent the Hard way to a 17 ft radius a...

Albina Co., Inc. recently bent 3/8” solid bar coiled to create 54 total springs to a 6” center-center diameter on pitch and also bent the required terminals. The coils will be used for a footwear display to help show the “springiness of the manufacturer’s shoes.” ...

Albina Co., Inc. recently completed bending spiral stringers of tube steel 10” x 6” x .625” wall all spiral bent the easy way down to a 7’ 4” inside radius. The stingers were bent for a Goodwin Proctor Law Office located in California. Albina Co., Inc. is the #1 steel stringer bender in the nation b...

Albina Co., Inc. bent 40,000 lbs. of various sizes of tube steel for the spiral staircases at the John J. Hemmingson Center at Gonzaga University Spokane, WA. Materials consisted of Tube Steel 16" X 8" X .500" WALL A500 GR B rolled the easy way down to a 22 ft radius. These lengths of material were ...

Albina recently finished another phase of work for the new Stanford ChEM-H & SNI Building located on the Stanford University Campus. This latest phase consisted of 35,000# of bent HSS (rectangular and square tubing). Tube Steel 12" X 2" X .250" WALL A500 GR B, bent the easy way down to a 15 ft radius (cold) Tube Steel 20" X 12" X .500" WALL A500 GR B, bent the easy way down to a 100 ft radius Tube Steel 14" X 14" X .375" WALL A500 GR B, down to a 15 ft radius (cold) To see artist renderings of the project and to learn more about the building's design please visit GGN's (Gustafson Guthrie Nichol) website. GGN is a landscape architecture firm based in Seattle, Washington. ...