Blog posts tagged with 'Spiral Bending of Structural Steel'

We had the pleasure of staying at The Arizona Biltmore (A Waldorf Astoria Resort) recently and got to experience the new Paradise Waterslides firsthand. Equally as impressive as the slides themselves is the spiral staircase used to acend to the top of the slides. Materials Albina bent for this project included tube steel, various sizes and widths of pipe and round tube as well as several pieces of angel and channel. Next Level Steel was the fabricator on the project.

A full list of bent materials includes:

TS 12" X 3" X .375" WALL A500 GR B

22 pcs spiral bent the easy way.  11 pcs bent to a 7’-4” outside plan view radius and 11 pcs bent to a 11’-0” Inside plan view radius.  All to AESS standards.

35 pcs bent the easy way (flat).  17 pcs bent to a 7’-1” inside radius and 18 pcs bent to a 11’-0” Inside radius.  All to AESS standards.

3" OD X .250" WALL A500 GR. B

112 pcs spiral bent to various radii and configurations all to AESS standards.

2½" OD X .188" WALL A500 GR B

6 pcs spiral bent to various radii and configurations all to AESS standards.

60 pcs bent (flat) to 3’-11” up to 5’-1” radii.

1¼" SCH40 A500B UNCOATED

25 pcs spiral bent to various radii (7’-5” up to 10’-10”) and configurations all to AESS standards.

12 pcs bent (flat) to 7’-5” up to 10’-10” radii.

1½" SCH40 A500B UNCOATED

106 pcs spiral bent to various radii (7’-2” up to 11’-1”) and configurations all to AESS standards.

73 pcs bent (flat) to 7’-2” up to 11’-1” radii.

C4 X 5.4# A36

51 pcs bent (flat) the hard way to various radii and configurations

2" X 2" X ¼" ANGLE A36

260 pcs rolled – some leg-in and some leg-out.  To various radii and configurations.

3" X 3" X 3/8" ANGLE A36

1 pc rolled leg-out to a 7’-7” radius

1 pc rolled leg-in to a 11’-0” radius

3" X 3" X ½" ANGLE A36

47 pcs rolled – some leg-in and some leg-out.  To various radii and configurations.

4" X 3" X ½" ANGLE A36

1 pc rolled leg-in to a 11’-0” radius

A recent issue of O & M Metal Fabricator Magazine, produced by NOMMA, features a case study written by Jeff Fogel with input from key members of the Albina Team, on the great spiraling feat it took to create the spectacular spiral staircase at the American Airlines Headquarters in Fort Worth, Texas.

We spiral bent Tube Steel 16″ X 16″ X .625″ WALL A500 GR B bent down to a an 18 foot radius, using our induction heating process to create the spiral stringers for the staircase. In addition to the 16″ square, we produced another set of spiral stringers consisting of Tube Steel 14″ x 6″ x .625″ wall REALLY tight, exposed and bent to a 5′-6″ radius on a 45° pitch. These are the type of bends that ONLY Albina can do! The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of four seven-story buildings. It cost nearly $300 million to build and houses over 6,500 employees. There were 10 tower cranes on the project and more than 1,000 construction workers on-site during the peak of the project. Viva Railings LLC (Photo credit & Glass/Railing Fabricator). Read “Daunting Curves Ahead"

The Buddy Holly Hall of Performing Arts and Science in Lubbock, Texas is a 220,000 square foot state-of-the-art campus featuring two theaters, event space, a full-service bistro and a ballet academy under one roof. Albina bent various materials for the signature spiral staircase in the Christine DeVitt Lobby. See LINK IN OUR BIO to get a sneak peek inside!

TS 16" X 8" X .625" WALL A500 GR C
16 pcs: Spiral bend the easy way
Bent down to a 7 ft plan view radius.

TS 10" X 6" X .625" WALL A500 GR C
10 pcs: Spiral bend the hard way
Bend down to a 14' 11" plan view radius.

Albina Co., Inc. recently rolled several materials for a custom spiral staircase. Materials bent by Albina Co., Inc. include:
PL ¾" X 14" A36- spiral rolled to a 5’ 3” plan view radius and a 9’ 3” plan view radius.
PL ¾" x 4" A36- spiral rolled to a 5’ 3” plan view radius.
PL ¾" X 8" A36- spiral rolled to a 5’ 3” plan view radius.
1½" OD X .120" WALL HREW: Rolled to a 8’ 11” plan view radius.

Thanks to Viva Railings LLC (Photo credit & Glass/Railing Fabricator) we have received some final installation pictures of the circular staircase at the "Trinity Complex", home to American Airlines Headquarters in Fort Worth, Texas. We spiral bent Tube Steel 16″ X 16″ X .625″ WALL A500 GR B bent down to a an 18 foot radius, using our induction heating process to create the spiral stringers for the staircase. In addition to the 16″ square, we produced another set of spiral stringers consisting of Tube Steel 14″ x 6″ x .625″ wall REALLY tight, exposed and bent to a 5′-6″ radius on a 45° pitch. These are the type of bends that ONLY Albina can do! The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of four seven-story buildings. It cost nearly $300 million to build and houses over 6,500 employees. There were 10 tower cranes on the project and more than 1,000 construction workers on-site during the peak of the project.

Albina Co., Inc. recently rolled 16 pieces of 5/8" plate A36 to as tight as a 162" radius. Six pieces of plate were used as the inside stringers of a beautiful spiral staircase at Altar'd State at the Forum Shops at Caesar's Palace. Six pieces of plate were used as the outside stringers of the staircase, and four pieces were used on the landings. We bent the stringers, trimmed rectangular treat cut outs, trimmed to length, match paired plates, tacked them together and match drilled all holes. We bolt matched the plates together with a 6 bolts, (2) on the end, (2) in the middle, and (2) on the other end.

We also bent 2½" X 2½" X ¼" ANGLE A36 to help create the spiral staircase. Materials included:

1 piece leg in to a 25” inside radius.  Albina to bend 180° minimum.

1 piece leg out to a 162” inside radius.  Albina to bend 70” minimum arc.

1 piece leg out to a 30” inside radius.  Albina to bend 36” minimum arc.

1 piece leg out to a 19” inside radius.  Albina to bend 80” minimum arc.

1 piece leg in to a 38” inside radius.  Albina to bend 180° minimum.

Lastly, we bent one piece of Flat Bar 5/8" x 12" A36 UM Plate leg in to a 38” inside radius and 180° minimum.

Back in June, I posted a picture of some induction heating process, for the new American Airlines headquarters in Fort Worth, Texas. In addition to the 16" square, we produced another set of 

The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of constructing four seven-story buildings. It will cost at least $300 million to build and will house over 6,500 employees. There are 10 tower cranes on the project and there will be more than 1,000 construction workers on-site during the peak. It is scheduled to open during the second half of 2019.  These are the type of bends that ONLY Albina can do!

We recently spiral bent tube steel 12" X 8" X .625" WALL A500 GR B Spiral the Easy way to a 173” radius for a customer spiral staircase located in Utah. Square and rectangular tubing is also known as HSS (hollow structural steel). Albina has the ability to bend both square and rectangular tubing. For rectangular tubing we can bend both the easy way (against the weak axis) and the hard way (against the strong axis). We can even provide Multi-Plane bending where we are bending both the easy way AND the hard way. Albina is a unique shop in that we can bend very small square materials such as TS ½” x ½” x .049” wall all of the way up to very large materials such as TS 20” x 12” x .625” wall, which happens to be the largest size that mills produce. Albina actually has a larger capacity than TS 20” x 12” x .625” wall, which means we can bend materials larger then what the mills produce!