Blog posts of '2018' 'September'

We bend all sizes of angle that the mill produces, up to 8” x 8” x 1¼”. We can bend all types of angle as well; including aluminum, stainless and carbon steel. Carbon angle (mill produced) is classified as ASTM A36 resulting in a yield point (PSI) of 36,000 minimum. We bend all stock lengths as well as non-stock lengths. Stock lengths range from 20 to 40 feet. Angle is produced with equal legs and unequal legs. Unequal legs would measure differently on the horizontal leg versus the vertical leg. We have the ability to bend angle with the leg in, leg out, heel in, heel out and heel up. We also have the ability to bend bulb flat. Bulb flat is similar to angle with one of the legs cut down to a very short "stub". We can bend bulb flat with the stem out and the stem in. We can bend all mill sizes produced up to 430 mm x 20 mm (16.93” wide x .787” thick). Bent angle can be used for many different applications. The most common application would be angle flanges which are full circles that are used to join sections of pipe together. Bent angle is also used for canopies, roof trusses and tunnel shoring applications.

Our industry is faced with a labor shortage right now and we know that many shops are struggling to keep up with the flow of work. In this case, don't ask "Siri" for help, ask us! Albina Co., Inc. is fortunate to have a strong union labor force behind us with workers that are available to meet your IMMEDIATE NEEDS. If you have a rush project that you need to get done-WE CAN HELP! If you have spillover work you need assistance getting to your customer- WE CAN HELP! Why hire temporary workers that you need to train? Why not team up with Albina Co., Inc.? We can be an extension of your shop. Let us partner with you on such projects as: Small Parts Bending Handrails Bike Racks Supplemental Fabrication (cutting, trimming, coping, end finishing, drilling, small part welding, etc.) WE CAN WORK TO YOUR BUDGET NEEDS....you tell us where our price needs to be to meet your budget requirements and we will figure out a way to get it done at that price. IF LEAD-TIME IS A CONCERN, HAVE NO FEAR....you tell us when you need it and we will allocate the crew required to meet your needs.