Blog posts tagged with 'Steel Industry Associations'

The National Council of Structural Engineers Associations (NCSEA) recently announced the 2019 Excellence in Structural Engineering Awards in the December issue of Structure Magazine. The Rufus 2.0 Spheres in Seattle, WA. Was awarded the “Outstanding Project” for New Buildings $20 Million to $100 Million. We worked with some of our amazing partners in the PNW on this project! Albina's portion included bending 750,000# and 1,050 pieces of rectangular tube steel bent the easy way and a portion bent off-axis for this project. Almost 8 miles of welding work and grinding was avoided because of Albina's ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!

"The Spheres" in Seattle, Washington have been all the buzz lately! "The Spheres" were featured in the May 2019 Edition of Modern Steel Magazine as the buildings were awarded the AISC's IDEAS2 Presidential Award for Excellence in Fabrication!  Just this last week, our VP of Sales, Brad Lund, was able to attend the award presentation ceremony at "The Spheres" in Seattle and we were awarded a plaque to display in our office. See below for some AMAZING pictures!

Albina Co., Inc. was the steel bender/roller for the Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! Albina Co., Inc. also bent the handrails and spiral staircase for the interior of the buildings.

The event is—"Curved Rails: From Field to Fabrication" August 9th & 10th in Erie, Colorado.

Living Design Studios will be the host shop. This shop is the home to Jonathan Falk who will be the 2020-2021 NOMMA President.

Terry Barrett, Pinpoint Solutions, and Matt Olseng, MDO Welding and Fabrication, will be the presenters. They will teach the basics of field measuring; transforming the measurements in to shop drawings and getting the project “off the paper” and into physical form. Matt will demonstrate fabrication of curved rails and share tips for success.

Albina was thrilled to be able to donate some curved steel parts to be used in the seminar. Visit the NOMMA Homepage to register!

The Madison Center is a 530 foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this project and worked specifically on what is being called "The Great Room" which is a 45-foot tall steel framed entryway rotunda. Albina bent many material types for this project including tube steel 8" x 6" up to 12" x 12", 3" x 3" angle, W10 and W16 wide flange, 8" pipe and more. Check out the article for some more details on the architectural feat and some great pictures. We will be heading up to Seattle soon to get some pictures of our own to share. Stay tuned!

Another Awarding Winning Project in the books for Albina Co., Inc. "The Spheres" have received the AISC 2019 IDEAS2 Presidential Award for Excellence in Fabrication! Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis for this project. Almost 8 miles of welding work and grinding was avoided because of Albina's ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! Numerous Pacific Northwest businesses collaborated to make The Spheres possible. Way to Go Team & Congratulations!

We recently joined the USFA (Utah Steel Fabricators Association) to assist in the effort to support and improve the steel fabrication industry in Utah.  USFA members are comprised of steel distributors, steel processors,  steel fabricators, and providers of many products and services related to metal fabrication. This is an exciting opportunity to network with other folks in the steel industry and to help strengthen the educational core in Utah's steel industry.

AISC recently released the first ever Design Guide of its kind in the United States offering information on the fabrication, design and detailing of curved members and we are offering you a FREE DOWNLOAD of the Design Guide from AISC.

Design Guide 33 was a collaborative effort of the members of the AISC Bender/Roller committee. We worked together for many years to provide this invaluable resource for the industry. Modern Steel Construction recently published an article titled "Design with a Twist" in the October 2018 Issue giving a brief highlight of topics covered in the Design Guide. AISC also created a very insightful webinar for their continuing education program titled "Design of Curved Members." If you are interested in obtaining a print copy of the Design Guide to assist with your efforts in specifying curved steel members, please contact us and we will be happy to get one to you!