Blog posts tagged with 'Structural Steel Bending'

In 2016, the City of Tualatin, Oregon was named a national finalist for the ABC award. Many local businesses, including Albina, supported the cause to help the City of Tualatin win the 3 million dollar grand prize. In April 2017, we learned that Tualatin did not win the 3 million dollar prize, but we know that the City of Tualatin is truly one of the best in the nation. Albina, and the steel bending and fabrication community is proud of the efforts that City officials and local businesses made to help make our city one of the best in the nation!

The quick and easy way to find out what we require when quoting a project specifying bent steel parts is to visit our online Steel Bending and Fabrication Request for Quote form on our website. Below is a summary of the information that we need to accurately and efficiently quote your job: a) Company Name, Address and Phone Number b) Primary Contact Name and Email Address c) Description of your project d) What is you Bid Deadline? e) Material Type & Size f) Material Quantity g) Provide any supplemental drawing or attachments that will help us bid the job. Give us the chance to quote your next job that specifies bent steel parts! We are a dependable supplier! Not only can you count on parts arriving on time, but the level of customer service and quality of parts that we provide will exceed your expectations. We value the relationships that we have with our customers.

Not all bridges are designed out of bent steel, however, most bridges DO require bent components. One such component, required on both retrofit or new bridge construction, is what is known as a bridge drain elbow. Albina is bending 6” Sch10 material on a new bending machine with new bend tooling for a Caltrans project. The bridge drain pipes we are supplying are 52 pieces in total that we are bending to a 18” center-line-radius (a 3d bend) at 90°. We are working closely with our customer to meet the tight Caltrans delivery requirements for this project. Stay tuned for some images of this project!

Albina can SUPPORT all of your steel bending needs. We were recently awarded a project to provide tunnel supports for a customer out of Arizona. We are processing 40,000# of bent steel tunnel supports for this particular opportunity. The project is being bent out of 60 ft lengths of wide flange W8 X 67# A992. We are providing AESS quality bends for all 45 pieces we are supplying. Each bend is to an 11’ radius the hard way. If you need a steel bending company to SUPPORT your needs, look no further than Albina!

It is our pledge to our customers that you are never surprised at the end of a project. We will confirm our anticipated delivery schedule at time of order acceptance. If something occurs to change that anticipated delivery schedule, your project manager will contact you to make sure you are aware of any scheduling changes. Many of our return customers come back to us due to our unparalleled customer service and communication. One customer recently told Albina management that they have used other benders in the past and will only use Albina moving forward. Never had they been so well informed throughout the production process. Albina provided answers to questions before the questions were even asked. Another example of customer service is our automated shipping notifications. The morning after an order ships, Albina sends an email informing the customer of the method of shipment and tracking number if available. This will allow our customers the ability to track their shipment as soon as it hits the road. Also included with this email are any MTR’s, if required, so the customer doesn’t have to wait for these critical reports to arrive with the shipment. Our customers have the reports (electronically) even before receiving their shipment. We know that customers rely on the information we provide and make plans based on the information we provide. We strive to meet or exceed every customers wants and needs.

Albina continues to invest in capital assets to expand our capabilities and allow us to better serve our customers. Most recently Albina has purchased various tooling sets for our draw bending equipment and our roll bending equipment. This tooling will allow Albina to offer bends that we were unable to previously offer OR offer bends with a higher level of quality then in the past. Some examples of tooling we purchased include: • 14” OD round bend dies allowing us to roll bend 14” OD material on our Roundo R11 and R13 machines. • 2” Sch10 tooling (mandrel and wiper) allowing us to bend Sch10 material with no distortion (3d and 5d bends) • 3” Sch10 tooling (mandrel and wiper) allowing us to bend Sch10 material with no distortion (3d and 5d bends) Albina is always looking to add to our tooling list to increase the bending options we can offer our customers.

The steel bending world, and life, is 360 degrees - now technology is too. We will be offering a drawing for a new Samsung Galaxy S7 Smart Phone and GearVR (virtual reality) googles next week when we exhibit at the NASCC (North American Steel Construction Conference) in San Antonio. Visit our BOOTH #8130 and see for yourself how awesome this new technology is and step into our virtual shop to experience the bending process first hand. One lucky winner will win a new phone and the virtual reality googles! Don't miss out on this opportunity. Sign up today!

Does traffic frustrate you? Are you tired of facing poor road conditions and various road hazards when driving? Albina is teaming up where ever we can with contractors to provide bent steel for new road construction. New roads in high traffic areas will help alleviate traffic congestion and will provide commuters with better roads and driving conditions. One such area in Oregon that has historically had very high congestion is the highway connecting the cities of Newberg and Dundee. Certain times of the day this highway sits at a standstill. Fortunately, there is a new Bypass road being built that will help with the heavy traffic congestion. Albina will be providing the bent steel for the new Newberg Dundee Bypass. Materials include: TS 10" X 4" X .375" WALL A500 GR B TS 12" X 8" X .375" WALL A500 GR B Materials are bent the Hard way to various configurations. All materials are bent to AESS (architecturally exposed structural steel) standards. For more information on the project you can read a recent update posted on Oregon.gov.

Do you require a fast lead-time for a RUSH high profile construction project? Well look no further than Albina Co., Inc. Albina has recently teamed up with a very loyal longtime customer to make the bends for the Seaworld Ocean Explorer project in San Diego, CA. Albina received authorization to proceed on 1/25/17 and 7 working days later we were shipping the first 48,000# truckload of bent steel! Our customer thought they were asking for a miracle and Albina was happy to provide exactly what was required. Albina processed 40 ft, 50 ft and 60 ft lengths of bent steel angle: 14" OD X .375" WALL A500 GR. B 8" X 4" X ½" ANGLE A36 8" X 6" X ½" ANGLE A36 8" X 8" X ½" ANGLE A36 All of the angle were bent to various radii, some of the lengths were bent leg-in and others leg-out. The Seaworld Ocean Explorer project will feature a mini-sub interactive ride called Submarine Quest and three new family-inspired rides inspired by the sea. Pictures will be posted upon completion of the project.

Albina is currently working on 130,000 pounds of curved steel for the Academy Museum of Motion Pictures located in LA. Albina is bending Square Tube Steel 6" X 6" X .500" WALL A500 GR B and Rectangular Tube Steel 7" X 4" X .500" WALL A500 GR B (approx. 190 pcs in total to various radii and configurations). The Academy Museum of Motion Pictures will be the world's premier film museum and a cultural institution for Los Angeles and will provide a destination for tourists to celebrate the magic and imagination of Hollywood and the movies. Check back for pictures as the project progresses.