Blog posts tagged with 'structural steel bending profiles'

“It is so fun to drop in!” Sherwood Skate Park just opened and it is awesome! Filled with kids every day! Albina was thrilled to be a part of the project bending 4 lengths x 20 ft. Tube Steel 2" X 2" X .188" WALL A500 GR B to a 42 ft radius and a 46 ft radius, as well as 3 lengths x 21 ft.: 2" SCH...

The August Issue of Modern Steel featured an article titled “What’s Cool In Steel” and one project highlighted was the Bashor Pedestrian Bridge at the San Diego Zoo (pages 23-26). Albina Co., Inc. was the bender/roller on this project. Materials rolled for this project included 24 lengths, each me...

Albina recently completed a great project for a curved steel roof at the M-Car Wash in Davie, Florida

Materials bent for this project included Tube Steel 10" X 4" X .250" WALL A500 GR B yielding 3 pieces. Albina cut the material to length, prepped and primered each piece. Tube Steel 10" X ...

We took our daughter to tour the University of Oregon this week and we were simply in awe of the amazing facilities and buildings on campus! Our tour started on Franklin Boulevard where the University broke ground in early March on the Phil and Penny Knight Campus for Accelerating Scientific Impac...

One of Southern California's iconic, flagship waterfront restaurant sites - 1360 North Harbor Drive along the North Embarcadero, is getting a facelift! The Port of San Diego and The Brigantine, Inc. began construction in July 2018 to redevelop Portside Pier including introducing four new dining co...

Albina recently bent various materials including tube steel, flat bar, pipe and angle for the Calvary Chapel in Ontario, Oregon. The Calvary Chapel is right on the Idaho border. Our bent material helped to create a lovely curved steel canopy for the chapel.

Materials Bent Include:

...

“The Spheres”, the recipient of the AISC 2019 IDEAS2 Presidential Award for Excellence in Fabrication grace the cover of the August Issue of Structure Magazine! The article focuses on the inspiration, the vision and the design of "The Spheres." Albina bent 750,000# and 1,050 pieces rectangular tub...

Albina recently rolled 89 pieces of plate to various radii (with holes) to fit on concrete columns for the Stonestown Galleria mall in San Francisco.
Our customer recently shared the below photos of the rolled plates and had this to say, “I just wanted to share that every single plate has fit pheno...

Albina recently bent some Tube Steel 6" X 3" X .500" WALL A500 GR B as double 90° bends to a 17" inside radius the hard way. These are difficult, tight bends for this material and the bends turned out perfectly! The bends will be used as vestibule frames for a lobby entry.

We were in Seattle this weekend and were able to get some exterior pictures of The Madison Center. The Madison Center is a 530 foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this pr...