Blog posts tagged with 'recreational applications requiring bent steel'

Take a journey in, above and around our production shop and office with this high resolution virtual and aerial tour of Albina Co, Inc. See our state of the art roll bending machines in action from a plan view, soar through our bays, watch our certified welders in action, and take a peek into our ...

Albina recently completed 233 pieces of 4" SCH40 A53B ERW bent in a Double 90° configuration on a 9" centerline radius for bollards for the back area of the new SoFi Stadium-Home of the Los Angeles Rams and the Los Angeles Chargers (loading dock, VIP parking, etc.) The bollards will be used for pr...

“It is so fun to drop in!” Sherwood Skate Park just opened and it is awesome! Filled with kids every day! Albina was thrilled to be a part of the project bending 4 lengths x 20 ft. Tube Steel 2" X 2" X .188" WALL A500 GR B to a 42 ft radius and a 46 ft radius, as well as 3 lengths x 21 ft.: 2" SCH...

Brian and I found ourselves in an elevator with Phil Knight, the co-founder and chairman emeritus of Nike, Inc., and we stood there in silence, when all we wanted to do was give him a 2 minute "elevator speech" about everything that is wrong with youth sports these days and how we wanted to partner ...

Albina is your steel bending expert for large material as well as small material! We just finished a project that required 650 safety bollards. Bollards are thick, low posts, usually made of iron or steel for the purpose of diverting traffic from an area or road and also often used on a wharf for f...

Albina has recently started making bike racks for a new customer. No matter the size or shape this customers knows that Albina will perform as promised. Albina can make racks from pipe, tubing (square / rectangular) and flat bar. The most recent project required 446 racks made out of Flat Bar 5/8" X...

Albina just recently completed work on a project that required 252 pcs of 2” Sch40 A53B ERW pipe bent for bollards. Each “staple” bollard was bent on a 6” center-line-radius (a double 90° configuration). All parts were held to a +/- 1/8” center-center dimension and they had to avoid all moisture (...