Blog posts tagged with 'structural steel bending profiles'

Albina bent 40,000# of steel for the Freyer-Newman Center, home to Denvers’ Botanical Gardens. Albina bent 60 pieces of W8 X 31# A992 the hard way to a full scale layout. We also bent Tube Steel 8" X 6" X .500" WALL A500 GR B the hard way and MC8 X 20# A36 the hard way. The Freyer - Newman Center ...

Albina provided 109,000# of bent steel for the Eli Lilly San Diego Biotech Center in La Jolla, CA. Eli Lilly doubled the size of its research facility to 300,000 square feet during this project. Materials included: 8″ X 8″ X 5/8″ ANGLE A36- half of the parts rolled leg in and half of the parts rol...

Albina bent 45,000 lbs. of steel for the Chase Center- Home of the Golden State Warriors. Materials bent included Tube Steel 2" X 2" X .250" WALL A500 GR B, Tube Steel 14" X 14" X .500" WALL A500 GR B, Tube Steel 3" X 3" X .375" WALL A500 GR B, and Tube Steel 12" X 12" X .500" WALL A500 GR all ben...

Albina elliptically bent 50,000# of 14" XH pipe, all material exposed, to extremely tight tolerances for the Wagon Creek Pedestrian Bridge in Mt. Shasta, California. The McConnell Foundation partnered with Siskiyou County by awarding a $600,000 grant for the Wagon Creek Bridge, and the bridge is c...

We recently completed a unique curved stainless steel art project for Camelback Commons in Arizona. Albina Co., Inc. bent 8 pieces of 3" SCH40 T304 Stainless Steel. All parts were bent to a full scale layout and all points needed to be hit +/-½”. The tightest radius was a 36” centerline. Camelback...

The National Council of Structural Engineers Associations (NCSEA) recently announced the 2019 Excellence in Structural Engineering Awards in the December issue of Structure Magazine. The Rufus 2.0 Spheres in Seattle, WA. Was awarded the “Outstanding Project” for New Buildings $20 Million to $100 M...

The color of the season around here is Red! Usually you wouldn't want to have the color red associated with a small business (ha!), but the signature red color we are seeing a lot of this season is our new DAVI MAV Variable Geometry K30 2-1/2” x 10 ft plate roll! The machine arrived in our shop a ...

The overall capacity for standard A36 plate is 10 ft x 2½". For higher yield ma...

Albina recently had the pleasure of teaming up with Ed Carpenter and his team to help create the Barbara Walker Crossing Wildwood Trail Bridge at West Burnside in Portland, Oregon. The bridge is 178’ long measured at the center of its curving deck. Its basic structure is a tri-chord truss of rusti...

The college tours continue and a few weekends ago, we had the pleasure of visiting Oregon State University in Corvallis, Oregon and seeing the curved steel canopy at the Student Experience Center.

The project was bent out of TS 20" X 12" X .500" WALL. Bent the hard-way to the tigh...