Close
You have no items in your shopping cart.
Search
RSS

Blog posts tagged with 'tanks'

Rolling Along & Staying Strong: Our Variable Axis Plate Roll is Strong, Reliable & Efficient
Rolling Along & Staying Strong: Our Variable Axis Plate Roll is Strong, Reliable & Efficient

Boy, has it been a long time since we have heard words like "solid, efficient and reliable" used, instead of words like "uncertain, unexpected, and unknown" that have been used so often these last few months in our country. Well, we are here to share with you that our variable axis plate rolling machine has drastically increased our capacity for plate rolling and we are excited about the opportunity to bid your plate rolling needs!
DAVI recently contacted us to conduct an interview related to our experience with both the MCP Big Angle Roll and the MAV Variable Axis Plate Roll. Click here to read "Face to Face With A Master Bender." Watch the video below to learn more and to see the MAV in action!

The overall capacity for standard A36 plate is 10 ft x 2½” thick. For higher yield material (example 60 ksi) the machine can pre-bend and roll the following examples:

  1. 10 ft x 1 5/8″ thick to a 61″ outside diameter.
  2. 9 ft x 1 3/4″ thick to a 96″ outside diameter.
  3. 10 ft x 3/4″ thick to a 30″ inside diameter.
WE GOT YOU A GIFT THIS YEAR! A NEW DAVI MAV K30 PLATE ROLL MACHINE: OPERATIONAL BY THE FIRST OF THE NEW YEAR!
WE GOT YOU A GIFT THIS YEAR! A NEW DAVI MAV K30 PLATE ROLL MACHINE: OPERATIONAL BY THE FIRST OF THE NEW YEAR!

The color of the season around here is Red! Usually you wouldn't want to have the color red associated with a small business (ha!), but the signature red color we are seeing a lot of this season is our new DAVI MAV Variable Geometry K30 2-1/2” x 10 ft plate roll! The machine arrived in our shop a few weeks ago and will be up an operational by 12/31! This is our gift to you as this machine will drastically increase our capacity for plate rolling and we are excited about the opportunity to bid your plate rolling needs!
The overall capacity for standard A36 plate is 10 ft x 2½”. For higher yield material (example 60 ksi) the machine can pre-bend and roll the following examples:

  1. 10 ft x 1 5/8″ thick to a 61″ outside diameter.
  2. 9 ft x 1 3/4″ thick to a 96″ outside diameter.
  3. 10 ft x 3/4″ thick to a 30″ inside diameter.

 DAVI MAV Variable Geometry K30 2-1/2” x 10 ft plate roll
DAVI MAV Variable Geometry K30 2-1/2” x 10 ft plate roll

With 2019 wrapping up, we also wrap up our 80th year in business. What an amazing accomplishment. Most businesses are not fortunate enough to see this type of longevity. 2019 has been a strong year for Albina where we have seen our national “footprint” expand into states where we were not previously providing bent materials. I think it is safe to say that Albina has a presence in almost every state in the US, which is a tremendous accomplishment for a company that started as a small, local shop. We would not be where we are at as a company without the efforts and dedication of the Albina team who strive to exceed your expectations in quality workmanship, on-time delivery, customer service, communication, equipment and procedures. We are so very fortunate for the amazing customers and vendors we work with as well. You make coming to work every day a pleasure. We are looking forward to 2020 and all the new opportunities and unique jobs we hope to work on together!

Meet Brian and Jaime Smith
Happy Holidays from Brian & Jaime Smith, and Family
NEW DAVI MAV K30 Plate Roll Purchased at FABTECH!
NEW DAVI MAV K30 Plate Roll Purchased at FABTECH!
We had the pleasure of attending FABTECH this week and purchased a new MAV Variable Geometry K30 2-1/2” x 10 ft plate roll! The machine is due to arrive in our shop next week and we will have it up and rolling soon!

The overall capacity for standard A36 plate is 10 ft x 2½". For higher yield material (example 60 ksi) the machine can pre-bend and roll the following examples:

  1. 10 ft x 1 5/8" thick to a 61" outside diameter.
  2. 9 ft x 1 3/4" thick to a 96" outside diameter.
  3. 10 ft x 3/4" thick to a 30" inside diameter.

This machine will drastically increase our capacity for plate rolling and we are excited about the opportunity to bid your plate rolling needs!

Our Plate Roll is Definitely Rolling Right Now!
Our Plate Roll is Definitely Rolling Right Now!

Albina's plate roll has been extremely busy as of late and we recently rolled 1/2" X 96" A36 and 3/8" X 96" A36 plate to a 55 foot radius for a large tank.  Very cool pictures below! Did you know that our plate rolling capacity is determined by a number of factors. The thickness we can roll is tied directly to the width of the plate we are bending. For example our plate roll can bend up to 10 foot wide material, but can only bend ¾” thick plate at 10 foot wide. As the plate becomes smaller in width we can bend thicker material. For example if a piece of plate measure 18” wide, the material could measure 2” thick.

rolled plate for tank
Another Fabricator Happy with the Quality of Our Plate Rolling!

Albina recently rolled ½" THICK A36 PLATE X 91" WIDE to create: 1 cylinder: 40" ID X 91" LONG 1 cone: 29" ID X 40" ID X 49.5" TALL Albina’s scope of work was to prebend, trim, roll, and tack weld per the drawings provided and turn it over to the fabricator for fabrication. After we completed the job, the fabricator had this message for us, "I just wanted to pass along the attached photo and compliment on the rolling you just did for us. The parts literally could not have fit better than they did which makes our job as fabricators so much easier. Please pass along a thank you to your team for another great job."

Rolled Plate Cylinder and Cone

Albina’s New Plate Roll Is In Action!
Our new plate roll is busy and we have some great projects on the machine right now. We are in the process of bending material for some custom tanks made out of Nickel material. This project consists of various tanks rolled to different diameters. All material is Nickel 201 ranging in thickness from 3/16” to 3/8”. The plate sections are up to 72” long prior to rolling. Diameters we are rolling to range from 57” to 107”. In addition to the tanks we are proving the cooling tubes as well. Cooling tubes are bent out of 1” Sch40 Nickel 201 (with terminals) to match the diameter of the tanks. Needless to say, this is a fun and challenging project!
Steel Plate Rolling
End uses for rolled steel plate are vast. Products made from rolled steel plate include cylinders, conical shapes, column wraps (stiffeners), bridge supports and industrial duct systems. Albina Co., Inc.'s plate rolling capabilities include 3/4" plate up to 10'0" in width (pre-bend up to 5/8" thick). Albina can also roll flat Bar the Easy Way to any thickness and size thru 4" x 22" where the section is dependent on thickness to width. For an in-depth explanation of the steel plate rolling process see our Bending Methods page. For more images and rolled steel product applications visit our Manufacturing and Industrial Parts page to see the various tanks we have produced as well as the full scope of parts we produce for various manufacturers.
Plate Rolling Products Produced at Albina Co., Inc.
Albina Co. Inc. is the #1 supplier of rolled plate for various applications: Casing Cylinders Rolled Plate Cylinders Stiffeners Curved Plate Sections for Earthquake Retrofits Concrete Column Wraps Tunnel Shoring Applications Tunnel Supports Tunnel Framework/Skeleton Column and Bridge Supports Cones Other Plate Formed Sections
Plate Rolling
Albina Co., Inc. is a premier plate processing supplier for the United States and Canada.  Albina can source, cut, roll, bevel (end prep) and fabricate complete any plate project you may require.  Our plate roll allows us to bend up to 10 ft wide sections.  We can also bend up to 2” thick plate depending on the width of the section in question.  We have successfully provided bent and fabricated plate to countless industries and end uses, some examples include:   Tanks, Cones, Cylinders, Ducting projects (with Albina supplied Angle flanges welded to the ends), Gored Elbows, Column Wraps, Custom stair cases, Marine applications, Art Work, etc.  The requirements and applications for rolled plate are limitless.   We can take all of the hassle out of your project and be a one source supplier. You place an order and we will take care of everything else, including freight to your facility or job site.