Blog posts tagged with 'davi master bender'

Boy, has it been a long time since we have heard words like "solid, efficient and reliable" used, instead of words like "uncertain, unexpected, and unknown" that have been used so often these last few months in our country. Well, we are here to share with you that our variable axis plate rolling machine has drastically increased our capacity for plate rolling and we are excited about the opportunity to bid your plate rolling needs!
DAVI recently contacted us to conduct an interview related to our experience with both the MCP Big Angle Roll and the MAV Variable Axis Plate Roll. Click here to read "Face to Face With A Master Bender." Watch the video below to learn more and to see the MAV in action!

The overall capacity for standard A36 plate is 10 ft x 2½” thick. For higher yield material (example 60 ksi) the machine can pre-bend and roll the following examples:

1. 10 ft x 1 5/8″ thick to a 61″ outside diameter.
2. 9 ft x 1 3/4″ thick to a 96″ outside diameter.
3. 10 ft x 3/4″ thick to a 30″ inside diameter.

This master bender machine offers the new and innovative iRoll camera system, allowing operators to view the part being bent compared to a radius template on the control screen. This is a new way to make quality and consistent parts. Another innovation with the master bender is the machine’s ability to “learn and remember” how different materials bend, where the rolls need to be positioned, and how much spring back is associated with a bend / material. This machine is a great fit for our shop, its size puts it right between our current Roundo R7 and R11 machines. Allowing us to reallocate work from two machines to three machines which should certainly help with our scheduling flexibility. The MCP30 will allow us to bend up to 8” x 8” angle, 9” square HSS, W16 the easy way / W12 the hard way and 14” Sch20 pipe / 12” Sch40 pipe. [caption id="attachment_1716" align="aligncenter" width="420"] Brian and Jaime Smith by the Davi Machine[/caption]

Our new machine is up and rolling! This master bender machine offers the new and innovative iRoll camera system, allowing operators to view the part being bent compared to a radius template on the control screen. This is a new way to make quality and consistent parts. Another innovation with the master bender is the machine's ability to “learn and remember” how different materials bend, where the rolls need to be positioned, and how much spring back is associated with a bend / material. This machine is a great fit for our shop, its size puts it right between our current Roundo R7 and R11 machines. Allowing us to reallocate work from two machines to three machines which should certainly help with our scheduling flexibility. The MCP30 will allow us to bend up to 8” x 8” angle, 9” square HSS, W16 the easy way / W12 the hard way and 14” Sch20 pipe / 12” Sch40 pipe.