Blog posts tagged with 'bending HSS'

We were recently involved with some bending for the Digestive Health Institute of Montana, the largest gastrointestinal (GI) medical group in Montana. Approximately 30,000 pounds of bent steel was shipped to Great Falls, MT for fabrication. This project was unique due to the wide range of materials ...

Albina Co., Inc. recently bent 90 pieces of Tube Steel 8" X 4" X .375" WALL A500 GR C the hardway to a complicated “S” configuration. The tightest “S” section that we bent was down to a 59” radius. All of the material was bent cold on our profile rolling equipment. This steel was shipping to a goo...

Albina Co., Inc. recently completed bending 21,000 pounds of curved steel for a Providence Medical Center located in Medford, Oregon. We bent Tube steel 8" X 6" X .250" WALL A500 GR B bent the Easy way to a 22 ft radius, tube steel 6" X 4" X .250" WALL A500 GR B Bent the Hard way to a 17 ft radius a...

Albina Co., Inc. recently completed bending spiral stringers of tube steel 10” x 6” x .625” wall all spiral bent the easy way down to a 7’ 4” inside radius. The stingers were bent for a Goodwin Proctor Law Office located in California. Albina Co., Inc. is the #1 steel stringer bender in the nation b...

Albina Co., Inc. bent 40,000 lbs. of various sizes of tube steel for the spiral staircases at the John J. Hemmingson Center at Gonzaga University Spokane, WA. Materials consisted of Tube Steel 16" X 8" X .500" WALL A500 GR B rolled the easy way down to a 22 ft radius. These lengths of material were ...

Albina recently finished another phase of work for the new Stanford ChEM-H & SNI Building located on the Stanford University Campus. This latest phase consisted of 35,000# of bent HSS (rectangular and square tubing). Tube Steel 12" X 2" X .250" WALL A500 GR B, bent the easy way down to a 15 ft radius (cold) Tube Steel 20" X 12" X .500" WALL A500 GR B, bent the easy way down to a 100 ft radius Tube Steel 14" X 14" X .375" WALL A500 GR B, down to a 15 ft radius (cold) To see artist renderings of the project and to learn more about the building's design please visit GGN's (Gustafson Guthrie Nichol) website. GGN is a landscape architecture firm based in Seattle, Washington. ...

Albina Co., Inc. recently bent 60,000# of Tube Steel 18" X 6" X .625" WALL A500 GR B for the Young Living Global Headquarters in Lehi, Utah. Young Living Global is a world leader in producing essential oils and broke ground in May 2017 for its 263,000 square-foot, world-class building which was desi...

We just finished a project for The Living Desert Zoo and Gardens in Palm Desert, California which consisted of over 60,000# of bent steel! This project consisted of AESS (Architecturally Exposed Structural Steel) material including both angle to rectangular tubing. The rectangular tubing ranged fro...

We have all heard about drones and how they may play a role in our future. Like it or not, drone technology is getting better and better and the areas of the business sector where they can and will play a large roll in the growth and development of certain areas of business. Albina has just finish...

Albina has finished the steel bending for the new LAX Midfield Satellite Concourse North Project. This project was part of an estimated $1.2 billion dollar modernization program at Los Angeles International Airport. Albina partnered with Schuff Steel and we bent over 1.2 million pounds of curved HSS...