Blog posts tagged with 'architectural & structural steel bending'

Albina Co., Inc. recently completed bending 21,000 pounds of curved steel for a Providence Medical Center located in Medford, Oregon. We bent Tube steel 8" X 6" X .250" WALL A500 GR B bent the Easy way to a 22 ft radius, tube steel 6" X 4" X .250" WALL A500 GR B Bent the Hard way to a 17 ft radius and Tube steel 6" X 3" X .250" WALL A500 GR B of which 4 lengths were bent the Easy way to a 23 ft radius and 4 lengths were bent the Hard way to a 17 ft radius. Lastly, we bent Tube steel 6" X 6" X .250" WALL A500 GR B Bent to a 44 ft radius.

The AISC (American Institute of Steel Construction) recently issued a press release announcing a dozen structural steel projects that have earned recognition in the 2018 Innovative Design in Engineering and Architecture with Structural Steel awards program (IDEAS2). Albina Co., Inc. was the steel bender of choice for the Merit Award winner UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art, Davis, Calif. To read to full press release, please visit the AISC website. The AISC has also produced a YouTube video titled "IDEAS2 Awards FAQ" highlighting the main criteria for steel buildings that are considered as potential candidates to receive an IDEAS2 award.

Brian and I found ourselves in an elevator with Phil Knight, the co-founder and chairman emeritus of Nike, Inc., and we stood there in silence, when all we wanted to do was give him a 2 minute "elevator speech" about everything that is wrong with youth sports these days and how we wanted to partner with him to create a fun and positive environment for all kids involved in youth sports. We choked! But the good news is, if we were standing in an elevator with world-renowned architect, Frank Gehry, we would have a 2 minute elevator speech about Albina Co., Inc. and steel bending to blow his socks off! Albina Co. is a small family-owned steel bending company founded in 1939. We are located in Tualatin Oregon (just south of Portland) and are able to service the entire United States and Canada from our single location! If you have the opportunity to do business with Albina Co., Inc., I KNOW you will not be disappointed. Albina Co., Inc. is unique from other bending companies for a number of reasons: •We have a full range of state of the art bending equipment allowing us to provide our customers with a one stop shopping experience for bending. We can bend any type of material (pipe, tube, plate and all structural members) and virtually any size of material (from the very small to the very large). •When processing a job, generating a quote, or providing bending consultation we are looking to be part of YOUR TEAM and not just a vendor. Our staff is made up of experts that are not satisfied with “good enough”; our staff strives to exceed your expectations. •For every job we process a knowledgeable project manager is assigned as your point of contact for the duration of your project. This project manager will always treat you with honesty and integrity and provide you with timely and accurate information. •Every order we process will be confirmed back to you and it will be reviewed by two members of management (production and QC) BEFORE we start production. This ensures that the most accurate information is delivered to the shop for processing. •We have developed our own custom in-house management software that helps us service you during every aspect of your project. In addition to our in-house management software we also offer bending calculators on our website to assist with complicated bending computations such as spiral bending math. •Our customers are our best sales staff- we frequently hear from our customers that bent materials provided by Albina are in better condition, less distortion and dimensionally more accurate when compared to previous experiences with competitors. We would love to partner with you on your next project. Do not let distance be a deterrent, consider us your “local” bending partner and see how working with Albina Co. is unmatched by other bending companies.

Building The Spheres was a project that began in February 2013 and just this month The Spheres will officially open. Numerous Pacific Northwest businesses collaborated to make The Spheres possible. The Spheres website is officially live and you can explore not only the building and the many milestones during conception and construction, but also the very unique plant life that inhabits The Spheres. Albina Co., Inc. was the steel bender/roller for the Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! [caption id="attachment_1427" align="aligncenter" width="600"] Curved Steel Spheres[/caption]

Albina Co., Inc. recently bent 60,000# of Tube Steel 18" X 6" X .625" WALL A500 GR B for the Young Living Global Headquarters in Lehi, Utah. Young Living Global is a world leader in producing essential oils and broke ground in May 2017 for its 263,000 square-foot, world-class building which was designed to complement Young Living’s philosophy of living harmoniously with nature. They focused on green initiatives in both the indoor and outdoor design. “The care and detail that went into designing our headquarters was a collaborative effort to capture our Founder and Chairman of the Board D. Gary Young’s vision for an architectural representation of the spirit of wellness and abundance that Young Living embodies,” said Jared Turner, Young Living Chief Operating Officer. “I am certain this campus will be one-of-a-kind, inside and out; and we look forward to sharing it with our local community and all who wish to visit.” We bent a total of 53 pieces and all of them were bent the easy way or spiral bent the easy way to as tight as a 43 foot radius. All of the steel material was bent to Architecturally Exposed Structural Steel standards.

In early December, we received notification from the American Institute of Steel Construction that the UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art, of which Albina Co., Inc. did the structural steel bending for, was selected by the AISC awards jury to receive the 2018 IDEAS2 Merit Award in the $15-$75 Million Category. In all, the jury selected 12 projects for the recognition this year for the IDEAS2 Award, the U.S. Steel Industry’s highest honor for building design. Four projects received the National Award, while six projects received the Merit Award, and two projects received the Presidential Award, one for excellence in adaptive reuse and another for excellence in erection engineering. AISC will announce the winning projects as NASCC: The Steel Construction Conference in Baltimore this spring. [caption id="attachment_1093" align="aligncenter" width="1200"] Overview of Curved Roof Structure[/caption] [caption id="attachment_1092" align="aligncenter" width="1200"] Curved Steel Entry [/caption] [caption id="attachment_1091" align="aligncenter" width="1200"] 50,000 Square Foot Permeable Roof[/caption]

We just finished a project for The Living Desert Zoo and Gardens in Palm Desert, California which consisted of over 60,000# of bent steel! This project consisted of AESS (Architecturally Exposed Structural Steel) material including both angle to rectangular tubing. The rectangular tubing ranged from 2” x 1” up to 16” x 8"! This is a great example of how well we can handle so many various sizes of material from the small to the big! We do it all! Another highlight of this project is that we were able to take the 10" X 6" X .375" WALL A500 GR B Tube Steel to a 7 ft radius! A very difficult accomplishment.

We have all heard about drones and how they may play a role in our future. Like it or not, drone technology is getting better and better and the areas of the business sector where they can and will play a large roll in the growth and development of certain areas of business. Albina has just finished rolling 50,000# of steel for a new UNMANNED AIRCRAFT HANGAR. For this project we rolled 6” angle, square tubing 3" x 3" and 6" x 6", as well as wide flange ranging from W8# to W18#. Stay tuned for some installation pictures in the near future.

Albina has finished the steel bending for the new LAX Midfield Satellite Concourse North Project. This project was part of an estimated $1.2 billion dollar modernization program at Los Angeles International Airport. Albina partnered with Schuff Steel and we bent over 1.2 million pounds of curved HSS (Hallow Structural Steel) as well as structural steel members for the project. This project consisted of various structural shapes and sizes and resulted in 0% rework. The steel bending was done over 7 months and we were able to meet or exceed all of our customers scheduling requirements. The satellite concourse will be a remote facility initially served by an airport busing operation and a passenger access tunnel (PAX) connection to the Bradley West Terminal. The new MSC will permit greater flexibility in scheduling improvements at other facilities, reduce reliance on remote gates, and ensure a high level of service for LAX passengers. [caption id="attachment_1352" align="aligncenter" width="1311"] Bent HSS (Hallow Structural Steel) For LAX Midfield Satellite Concourse North Project[/caption]

Albina really enjoyed seeing some of our valued customers at the NASCC trade show earlier in 2017. After the show Albina was asked to spiral bend some TS 20" X 4" X .500" WALL A500 GR B material! This very difficult material was successfully bent by Albina to a varying pitch over the entire length. This bending project was for the Cambridge North Bridge at the University of Kansas. This particular customer is located in Kansas. They know, if you want it done right, you call Albina. No matter how far away they are located.