Blog posts tagged with 'your steel bending experts'

Albina Co., Inc. recently rolled some rooftop handrails for the Hotel Nikko, a luxurious boutique hotel in San Francisco. Materials bent included:

1½" SCH40 A53B ERW WHEELED
150 pcs- cut, cope, deburr and bent by Albina. Albina held the coped end at a specified dimension and left the other end long for field trimming. All rails were bent on a 4” center-line radius.

1½" SCH40 T316L S/S #4 POLISH
74 pcs- cut, cope, deburr and bent by Albina. Albina held the coped end at a specified dimension and left the other end long for field trimming. All rails were bent on a 4” center-line radius.

Curved steel treehouse structures provide a tranquil and relaxing break area for the employees of NVIDIA, a computer hardware manufacturer, at the corporate headquarters in Santa Clara, California. Albina Co., Inc. was the steel bender-roller on this project. We bent 55,000# of bent material including:

TS 12" X 4" X .500" WALL A500 GR B

               6 pcs bent the easy way to a 28 ft radius (30 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 5" X 5" X .375" WALL A500 GR B

               12 pcs bent to a 31 ft radius (16 ft of bent material per pc).  Material bent, trimmed and drilled by Albina.

TS 8" X 2" X .250" WALL A500 GR B

               89 pcs bent the hard way to an approx. 32 ft radius (approx. 18 ft of bent material per pc).  Material bent, trimmed and drilled by Albina.

3" X 3" X ¼" ANGLE A36

               12 pcs bent leg in to a 31 ft radius (15 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 3" X 3" X .250" WALL A500 GR B

               4 pcs bent to a 5 ft radius (7 ft of bent material per pc).  Material bent and trimmed by Albina.

TS 5" X 3" X .250" WALL A500 GR B

               4 pcs bent the easy way to a 5 ft radius (7 ft of bent material per pc).  Material bent and trimmed by Albina.

5" X 5" X ½" ANGLE A36

               6 pcs bent leg out to a 2 ft radius (1 ft of bent material per pc).  Material bent and trimmed by Albina.

“Wind Witches” by Brian Borrello. The rounded twisting shapes of “Wind Witches” by Brian Borrello are inspired by the logarithmic spiraling within desert plants. The two sculptures are also an expression of the order and symmetry found in nature. Located at Big Bend Community College in Moses Lake, WA. Materials bent and Fabricated complete by Albina. Photo credit: Brian Borrello.

Assembly #1: 3" SCH40 T304/T304L S/S (bent to a 14 ft radius)
Overall height- 15 – 21 ft tall.
Albina to pre-polish pipe, Trim Pipe, Weld pipe to Base Plates, and Fit / Weld on Leaf Flanges.

Assembly #2: 2½" SCH40 T304/T304L S/S (bent to a 10’-6” radius).
Overall height- 10 – 14 ft tall.
Albina to pre-polish pipe, Trim Pipe, Weld pipe to Base Plates, and Fit / Weld on Leaf Flanges.

That’s One Big Slinky! Albina recently coiled two assemblies out of 39 lengths x 20 feet of 2” OD x .120” wall T304 s/s (180 grit). Albina rolled, trimmed, weld prepped and TIG welded each coiled length. The material was coiled to a 90” diameter. Albina has the expertise to bend coils to virtually any configuration. We coil all forms of material: pipe, tubing, square and rectangular. We also work with all types of material: carbon, stainless, aluminum, copper, zirconium, etc. Photo Credit: @Brooke_Smith_Photography

Albina recently rolled a ton of different material and material sizes for the Arizona Biltmore (A Waldorf Astoria Resort) for their new Paradise Slides. Materials Albina bent for this project included tube steel, various sizes and widths of pipe and round tube as well as several pieces of angel and channel. Next Level Steel was the fabricator on the project.

A full list of bent materials includes:

TS 12" X 3" X .375" WALL A500 GR B

22 pcs spiral bent the easy way.  11 pcs bent to a 7’-4” outside plan view radius and 11 pcs bent to a 11’-0” Inside plan view radius.  All to AESS standards.

35 pcs bent the easy way (flat).  17 pcs bent to a 7’-1” inside radius and 18 pcs bent to a 11’-0” Inside radius.  All to AESS standards.

3" OD X .250" WALL A500 GR. B

112 pcs spiral bent to various radii and configurations all to AESS standards.

2½" OD X .188" WALL A500 GR B

6 pcs spiral bent to various radii and configurations all to AESS standards.

60 pcs bent (flat) to 3’-11” up to 5’-1” radii. 

1¼" SCH40 A500B UNCOATED

25 pcs spiral bent to various radii (7’-5” up to 10’-10”) and configurations all to AESS standards.

12 pcs bent (flat) to 7’-5” up to 10’-10” radii.

1½" SCH40 A500B UNCOATED

106 pcs spiral bent to various radii (7’-2” up to 11’-1”) and configurations all to AESS standards.

73 pcs bent (flat) to 7’-2” up to 11’-1” radii.

C4 X 5.4# A36

51 pcs bent (flat) the hard way to various radii and configurations

2" X 2" X ¼" ANGLE A36

260 pcs rolled – some leg-in and some leg-out.  To various radii and configurations.

3" X 3" X 3/8" ANGLE A36

1 pc rolled leg-out to a 7’-7” radius

1 pc rolled leg-in to a 11’-0” radius

3" X 3" X ½" ANGLE A36

47 pcs rolled – some leg-in and some leg-out.  To various radii and configurations.

4" X 3" X ½" ANGLE A36

1 pc rolled leg-in to a 11’-0” radius

The Leach Botanical Garden in Portland, Oregon underwent a six year, $12.6 million dollar renovation complete with new garden space, walking paths, a unique curved steel Aerial Tree Walk, an arbor and a fireside terrace. The Oregonian featured an article titled "Leach Botanical Garden Unveils $12.6 Million Renovation, a Gift of Green Space for SE Portland."

Albina bent the following materials for the project:

3" X 2" X ¼" ANGLE T304L S/S
63 lengths rolled to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

W12 X 26# A588
24 lengths 40 – 50 ft long.
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

FB ¼" X 4" A588
49 lengths x 20 ft
Rolled the easy way to various configurations and radii- all per customer supplied drawings.
Customer to trim and splice as required (Albina roll only).

Albina Co, Inc. produces consistent, accurate and repeatable rolled metal parts and components for various OEM and industrial business sectors. We produce small parts such as pipe spools, hydraulic lines, handles, brake bands, boiler tubes, heat exchangers, and coils.

We bend and fabricate pipe spools for a variety of different industries. We have the ability to provide small and large spools out of both carbon and stainless materials. Our qualified welders can TIG or MIG weld spools depending on customer requirements.

Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports. Here is an example of an extremely impressive bend for a commercial processing application:

Albina bent, torch cut out, fit and tack welded 10" SCH120 SA106B SMLS to a 12 ft radius.

Our plate roll is consistently rolling custom tanks for countless industries, brake bands for industrial manufacturers and non-standard pipe diameters.

Our qualified crew has the skills required to fabricate your wear backs, or other pressure retaining components.

If your product needs to be opened, closed, held or picked up, we can produce your handle!

Albina has the expertise to bend coils to virtually any configuration. We coil all forms of material: pipe, tubing, square and rectangular. We also work with all types of material: carbon, stainless, aluminum, copper, zirconium, etc. One call can result in bent material fully fabricated with flanges, fittings, miscellaneous components, etc.

Most alternative energy projects require AESS (Architecturally Exposed Structural Steel) and Albina can bend to your AESS requirements. Team up with Albina on your next project so we can help you recognize savings and treat you to a stress free experience. 

Albina Co., Inc. recently provided 102,000# of bent steel for the curved roof structure at the UCHealth Steadman Hawkins Clinic Denver in Englewood, Colorado. The building will serve as a rehabilitation and sports medicine center in Denver. The project's most prominant feature is the 185-ft-long, 40-ft-wide curved steel roof. The project is featured on the cover and as a feature article in of the February Issue of Modern Steel.

Albina provided the following materials for the project:

W30 X 99# A992- 2 pcs bent to a 401 ft radius the hardway

W21 X 44# A992- 2 pcs bent to a 401 ft radius the hardway

W16 X 26# A992- 36 pcs bent to a 401 ft radius the hardway

W16 X 31# A992- 2 pcs bent to a 401 ft radius the hardway

C10 X 20# A36- 2 pcs bent to a 66’-5” radius with flanges in

C10 X 20# A36- 2 pcs bent to a 51’-7” radius with flanges out

C12 X 20.7# A36- 12 pcs bent to a 401 ft radius the hardway

Albina recently provided 127,000# of bent steel for a 230-foot long bicycle bridge along the South Bayfront in Emeryville, CA. Albina induction bent 15 lengths of TS 16" X 16" X .625" WALL A1085 A513 to 149 ft and 289 ft radii and 9 lengths of TS 20" X 12" X .625" WALL A1085 A513 induction bent the easy way to 290 ft and 310 ft radii.

Photo Credit: Campus Planning & Facilities Management University of Oregon

Do you ever find yourself stumbling over your words when people ask you what you do or to describe what your company does? My father taught me at a young age that I should always have my elevator speech ready so I could describe to someone what we do in the amount of time it takes to travel up a few stories in an elevator. Since we can't ride in elevators with anyone other than our immediate family anymore, here is a quick 30 second video of some of the amazing rolled metal projects we have been a part of!

Photo Credits:
Signature Curved Steel Sky Bridge at the Phil and Penny Knight Campus for Accelerating Scientific Impact by Campus Planning and Facilities Mgmt. University of Oregon.
Portside Pier San Diego Bay CA. (Building and Staircase) by @haleyhillphotography
Barbara Walker Pedestrian Bridge along Portland's Wildwood Trail in Portland Oregon by Ed Carpenter
Circular Staircase at the "Trinity Complex", home to American Airlines Headquarters in Fort Worth, TX by Viva Railings LLC
Hayward Field Stadium Roof and Tower by Oregon Track & Field
Williams Creek Shoup Bridge in Salem, Idaho by Linda Ulery