Close
You have no items in your shopping cart.
Search
RSS

Blog posts tagged with 'Square and Rectangular Tube Steel'

21,000 Lbs. of Steel Bent for Providence Medical Building in Medford, OR.
Albina Co., Inc. recently completed 21,000 lbs. of bent steel for a curved steel entry way and canopy at the Providence Medical Building located in Medford, Oregon. The bent steel material consisted of: Tube Steel 8" X 6" X .250" WALL A500 GR B Bent the EW to a 22 ft radius. Tube Steel 6" X 4" X .250" WALL A500 GR B Bent the HW to a 17 ft radius. Tube Steel 6" X 3" X .250" WALL A500 GR B 4 lengths bent the EW to a 23 ft radius and 4 lengths bent the HW to a 17 ft radius. Tube Steel 6" X 6" X .250" WALL A500 GR B Bent to a 44 ft radius. [caption id="attachment_1230" align="aligncenter" width="500"]Curved Tube Steel Providence Medical Building Medford, OR. Curved Steel Entry-Way at Providence Medical Building Medford, OR. [/caption] [caption id="attachment_1231" align="aligncenter" width="500"]Curved Tube Steel Providence Medical Building Medford, OR. Square and Rectangular Structural Tube Steel Bent to Various Radii[/caption]
Updated Pictures of Curved Rectangular Tube Steel "Spheres" Covered in Glass
See below for the most recent pictures of the curved steel "Spheres" in Seattle, WA. 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina's ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! [caption id="attachment_1208" align="aligncenter" width="300"]Curved Steel Bio-Spheres Covered in Glass Curved Steel Bio-Spheres Covered in Glass[/caption] [caption id="attachment_1209" align="aligncenter" width="300"]Curved Steel Bio-Spheres Covered in Glass Curved Steel Bio-Spheres Covered in Glass[/caption] [caption id="attachment_1210" align="aligncenter" width="220"]Curved Steel Bio-Spheres Covered in Glass Curved Steel Bio-Spheres Covered in Glass[/caption]
New Spiral Staircase at Golden West College Huntington Beach, CA.
Albina is happy to be teamed up with a very loyal fabricator on the Golden West College Project located in Huntington Beach, CA. Construction of a new 51,969 square foot building at the center of campus will house all student services. A new spiral staircase with landings was required for the new building and the California fabricator new the best choice for this project was Albina. This project required Tube Steel 16" X 4" X .500" WALL A500 GR B material to be spiral bent for the stringers and also bent flat (the easy way) for the landing supports. The spiral staircase also required some smaller HSS square tubing for stringers and landings out of Tube Steel 6" X 6" X .625" WALL A500 GR B. Everything on this project was bent to AESS standards.
Partnership Health Plan of California Construction Project Required Bent Rectangular Tube Steel
Recently a customer approached us with a very difficult steel bending project and wanted to know if Albina Co., Inc. was able to perform the difficult bends. The steel bends were for the Partnership Health Plan of California construction project. Partnership HealthPlan of California has outgrown its current home and will add a new 104,000-square-foot office building that will sit next to its current headquarters on Business Center Drive. This project consisted of primarily HSS Rectangular Tubing. The largest tube measures 20” x 8” x .375” wall and the smallest measures 8” x 4” x .500” wall. Some of the lengths were bent the easy way while other lengths were bent the hard way. Utilizing our in-house developed internal support system we roll bent all of the HSS material without any heat and exceeded all of our customers quality requirements.