We recently completed bending some component parts for a customer which were a mix of carbon steel and nickel plate, pipe and bar. In the first image, we bent the coil, the terminals, the cylinder and the cylinder stiffeners. In the second image, we bent the inner and out cylinders on the top half. On the third image, we bent the upper and lower cylinders. Our customer was so thrilled with the parts that we provided, we received the following email from them: “The components Albina did for us were fantastic! Please pass along to your guys that the items you guys made were just about perfect. It really helped the fabrication process go smoothly. We really appreciate the work you did on this project for us.”
Our new plate roll is busy and we have some great projects on the machine right now. We are in the process of bending material for some custom tanks made out of Nickel material. This project consists of various tanks rolled to different diameters. All material is Nickel 201 ranging in thickness from 3/16” to 3/8”. The plate sections are up to 72” long prior to rolling. Diameters we are rolling to range from 57” to 107”. In addition to the tanks we are proving the cooling tubes as well. Cooling tubes are bent out of 1” Sch40 Nickel 201 (with terminals) to match the diameter of the tanks. Needless to say, this is a fun and challenging project!
Albina has purchased a new plate roll to add to our capabilities!
This new plate roll is a Lemas Hydraulic 4-roll, 3/8” capacity over 6 feet long.
The diameter of all rolls measures 7.87”. This machine will allow us to roll material tighter then we could previously roll. It will also allow us to roll thinner material then we could previously roll. We had a recent project requiring us to roll some very tight cylinders which prompted the purchase of the machine, but we are excited to take on more new work that we previously had to turn away.
End uses for rolled steel plate are vast. Products made from rolled steel plate include cylinders, conical shapes, column wraps (stiffeners), bridge supports and industrial duct systems. Albina Co., Inc.’s plate rolling capabilities include 3/4″ plate up to 10’0″ in width (pre-bend up to 5/8″ thick). Albina can also roll flat Bar the Easy Way to any thickness and size thru 4″ x 22″ where the section is dependent on thickness to width. For an in-depth explanation of the steel plate rolling process see our Bending Methods page. For more images and rolled steel product applications visit our Manufacturing and Industrial Parts page to see the various tanks we have produced as well as the full scope of parts we produce for various manufacturers.
Albina Co. Inc. is the #1 supplier of rolled plate for various applications:
Rolled Plate Cylinders
Curved Plate Sections for Earthquake Retrofits
Concrete Column Wraps
Tunnel Shoring Applications
Column and Bridge Supports
Other Plate Formed Sections
Albina Co., Inc. is a premier plate processing supplier for the United States and Canada. Albina can source, cut, roll, bevel (end prep) and fabricate complete any plate project you may require. Our plate roll allows us to bend up to 10 ft wide sections. We can also bend up to 2” thick plate depending on the width of the section in question. We have successfully provided bent and fabricated plate to countless industries and end uses, some examples include: Tanks, Cones, Cylinders, Ducting projects (with Albina supplied Angle flanges welded to the ends), Gored Elbows, Column Wraps, Custom stair cases, Marine applications, Art Work, etc. The requirements and applications for rolled plate are limitless.
We can take all of the hassle out of your project and be a one source supplier. You place an order and we will take care of everything else, including freight to your facility or job site.