Category Archives: Air Duct Systems & Component Parts

It’s DUCT Season!

Need duct component parts? Albina is the largest distributor of angle flanges west of the Rocky Mountains! Over the last few months, Albina has supplied thousands of angle rings in various diameters and out of various material sizes all for the Intel project in Oregon.

If you have the need we will have the stock! Give us a call, we will help you connect your ducting.

Stocked items (angle rings, plate flanges and cut-offs) can be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax.

Albina can drop ship Clamp Together Ducting and Standard Component Parts direct to your location. Albina’s inventory helps local contractors save time and expense with standardized component parts. Stocked parts are available for immediate shipment which means you can complete your project on time without costly delays. Non-standard component parts can be ordered or fabricated upon special request.

Do You Want to Extend the Life of Your Industrial Pipe Elbows, Reduce Downtime and Maintenance Costs?

If you answered yes, than you should consider wearbacks for your elbows. For decades, Albina has supplied customers with bent elbows where we weld a plate or channel to the outside of the bend (acting as the wearback). A wearback is installed to act as an additional layer to the bend, when the backside of an elbow finally is worn through, any materials running in the piping system will remain inside and the piping system will continue to function due to the extra layer of material on the backside of the elbow. We recently bent some 8″ SCH80 T304L S/S SMLS to 30° elbows. After bending the elbows, we bent and fabricated wearbacks out of ½” stainless plate and welded the wearbacks to the outside of the pipe elbows.

Did You Know That Albina Co., Inc. is the Largest Distributor of Angle Flanges West of the Rocky Mountains?

We have thousands of angle flanges in stock as well as numerous other component parts for your duct collection and air handling systems. If you need angle flanges or angle rings for a project, Albina Co., Inc. is your source. We can supply you with carbon flanges as well as stainless flange. We stock 3” – 72” diameter rings in carbon steel and can get you any special order items you might have (larger rings, odd size material, no holes, etc). We even have a small stock of stainless flanges that are the most common sizes we sell, we can also bring in any size stainless flange you may require (that we don’t have in stock).

Connect with Albina! We can provide you with all of your angle flange connection needs!

Elbows Still Available! New Supplier and Better Rate

As you know, Albina has had some changes with our suppliers regarding the elbows we supply. Many of our customers have expressed interest in the old K&B style elbows that were discontinued when K&B closed this segment of their operations.

Albina is excited to announce we have found a supplier that provides the old K&B elbows at a much better rate than we were previously charging. These elbows will still ship direct from the factory, and will be delivered with the same level of quality you have grown accustomed to. We strongly urge you to log onto our website and review the updated pricing at www.albinaco.com. We are confident you will be pleased with the savings. If you are not currently set up with a username and password, please let Jason@albinaco.com know and he will set one up for you.

Albina appreciates your business and we look forward to servicing your needs.

Online Ordering for HVAC Component Parts Available NOW!

Albina Co., Inc. has developed an online ordering program for Duct System and Component Parts.

Stocked items (angle rings, plate flanges and cut-offs) can now be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax. Streamline your ordering process by logging onto our website to request an account and begin the online ordering process.

Order Your HVAC Component Parts Today Online!

Albina Co., Inc. has developed an online ordering program for Duct System and Component Parts. Albina has been a distributor of component parts for dust and air handling systems for 45 years!

Stocked items (angle rings, plate flanges and cut-offs) can now be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax. Albina’s number one goal is to provide superior customer service and an online ordering program will streamline your ordering process. Log onto our website to request an account and begin the online ordering process.

We have had several customers sign up to date and the new online tool has really streamlined the ordering process.

Online Ordering for Duct Systems and Component Parts!

Albina Co., Inc. has developed an online ordering program for Duct System and Component Parts. Albina has been a distributor of component parts for dust and air handling systems since 1969.

Stocked items (angle rings, plate flanges and cut-offs) can now be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax. Albina’s number one goal is to provide superior customer service and an online ordering program will streamline your ordering process. Log onto our website to request an account and begin the online ordering process.

Online Ordering for Duct Systems and Component Parts Coming Soon!

Albina Co., Inc. is in the process of developing an online ordering program for Duct System and Component Parts. Albina’s number one goal is to provide superior customer service and an online ordering program will streamline your ordering process. We are in the process of testing the new system and hope to roll it out by month’s end. Stay tuned for more details!

Online Order Program for Duct Systems and Component Parts in Development

Albina Co., Inc. continues to strive to be your “one stop shop” for all your bending, fabrication and component part needs. We are in the process of developing a simple online ordering system for stocked angle rings, plate flanges and cut-offs. We will continue to blog about our progress and will contact customers as soon as it is up and running. We also have many non-stocked component parts including clamp together ducting, automatic gates, elbows, ball joints, hanger rings, handles, floor sweeps, oil mist accumulators, oil mist curbs, no lost stacks and silencers. Call for pricing and availability!

Pressed vs. Rolled Flanges (angle flanges, rolled angle, component parts)

Albina is happy to announce a change to the standard angle flanges we stock. Due to the high demand for rolled angle flanges vs pressed angle flanges, Albina now stocks rolled flanges ranging from 6″ – 72″. Flanges measuring 4″ and 5″ in diameter can also be provided in a rolled condition as a special order item. The biggest reason that we are finding companies needing rolled flanges vs. pressed flanges is that companies can’t have the gap between the pipe and the flange. This gap asks as a moisture trap and can drastically reduce the lifespan of the flange connection. Customers are also reporting that rolled flanges are easier to paint and also easier to Vanstone- the sharp rolled corner acts as a break in the Vanstone process.

Please call us or email us for a quote.