We just finished a project for a new customer out of Texas. Albina Co., Inc. provided 40,000# of bent steel for the Fort Worth Multi-Purpose Arena project in Fort Worth, Texas which broke ground on April 18th. Albina provided 28 pieces of spiral bent Tube Steel 8″ X 4″ X .500″ WALL A500 GR B the easy way to AESS (Architecturally Exposed Structural Steel) standards. The tightest section was bent to a 17 foot radius. The Fort Worth Multipurpose Arena will be a 14,000-seat, multipurpose venue owned by the City of Fort Worth. The state-of-the-art arena, scheduled to open in November 2019, will host concerts, sporting events and family entertainment, and will be the new home to Fort Worth Stock Show Rodeo performances.
Do you like movies and the academy awards? Check out a recent project that we have been working on for the Academy Museum of Motion Pictures
We have bent and shipped approximately 328,000# of bent steel for this project.
Materials consisting of:
Tube Steel 12″ X 6″ X .375″ WALL A500 GR B
Tube Steel 8″ X 4″ X .375″ WALL A500 GR B
Tube Steel 6″ X 6″ X .375″ WALL A500 GR B
6″ OD X .375″ WALL A500 GR B
3″ X 3″ X ¼” ANGLE A36
Wide Flange W14 X 145# A992
Wide Flange W14 X 90# A992
Wide Flange W14 X 68# A992
Wide Flange W14 X 48# A992
Wide Flange W16 X 77# A992
Wide Flange W24 X 55# A992
183 pieces in total were bent the easy way and others were bent the hard way down to the tightest radius of 56 feet. Check back for erection pictures very soon! It is going to be quite and amazing building!
Bridge bending? Yes- we bend steel for anything, even bridges! In fact every month steel is leaving our yard for different steel bridge projects. We recently finished bending steel for two bridge projects located on opposite ends of the United States. The first project shipped to Maine and consisted of 12,000# of HSS (rectangular and square tubing). Sizes ranged from TS 8” x 8” x .375” wall to TS 14” x 14” x .375” wall. The second project located in California (a week later) was for 21,000# of W33 X 118# A992 bent the hard way. We can provide bending needs for east coast and west coast projects!
Albina recently worked with a loyal customer out of Colorado on the UC Health Highlands Ranch Hospital. The new 85,000 square foot hospital is being built as a proactive approach to the projected 25%+ population increase by 2025 for this growing area of Colorado. Albina needed to bend and ship 40,000# of bent steel to meet a critical project schedule. Albina was able to finish and ship the project days before the required date, once again exceeding customer expectations!
The materials on this project consisted of:
W12 X 26# A992
W12 X 14# A992
W16 X 36# A992
W14 X 22# A992
W14 X 30# A992
W16 X 26# A992
W18 X 40# A992
W18 X 35# A992
All bent the Hard way!
Albina Co., Inc. recently completed bending 21,000 pounds of curved steel for a Providence Medical Center located in Medford, Oregon. We bent Tube steel 8″ X 6″ X .250″ WALL A500 GR B bent the Easy way to a 22 ft radius, tube steel 6″ X 4″ X .250″ WALL A500 GR B Bent the Hard way to a 17 ft radius and Tube steel 6″ X 3″ X .250″ WALL A500 GR B of which 4 lengths were bent the Easy way to a 23 ft radius and 4 lengths were bent the Hard way to a 17 ft radius. Lastly, we bent Tube steel 6″ X 6″ X .250″ WALL A500 GR B Bent to a 44 ft radius.
The AISC (American Institute of Steel Construction) recently issued a press release announcing a dozen structural steel projects that have earned recognition in the 2018 Innovative Design in Engineering and Architecture with Structural Steel awards program (IDEAS2). Albina Co., Inc. was the steel bender of choice for the Merit Award winner UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art, Davis, Calif. To read to full press release, please visit the AISC website. The AISC has also produced a YouTube video titled “IDEAS2 Awards FAQ” highlighting the main criteria for steel buildings that are considered as potential candidates to receive an IDEAS2 award.
Brian and I found ourselves in an elevator with Phil Knight, the co-founder and chairman emeritus of Nike, Inc., and we stood there in silence, when all we wanted to do was give him a 2 minute “elevator speech” about everything that is wrong with youth sports these days and how we wanted to partner with him to create a fun and positive environment for all kids involved in youth sports. We choked! But the good news is, if we were standing in an elevator with world-renowned architect, Frank Gehry, we would have a 2 minute elevator speech about Albina Co., Inc. and steel bending to blow his socks off!
Albina Co. is a small family-owned steel bending company founded in 1939. We are located in Tualatin Oregon (just south of Portland) and are able to service the entire United States and Canada from our single location!
If you have the opportunity to do business with Albina Co., Inc., I KNOW you will not be disappointed. Albina Co., Inc. is unique from other bending companies for a number of reasons:
•We have a full range of state of the art bending equipment allowing us to provide our customers with a one stop shopping experience for bending. We can bend any type of material (pipe, tube, plate and all structural members) and virtually any size of material (from the very small to the very large).
•When processing a job, generating a quote, or providing bending consultation we are looking to be part of YOUR TEAM and not just a vendor. Our staff is made up of experts that are not satisfied with “good enough”; our staff strives to exceed your expectations.
•For every job we process a knowledgeable project manager is assigned as your point of contact for the duration of your project. This project manager will always treat you with honesty and integrity and provide you with timely and accurate information.
•Every order we process will be confirmed back to you and it will be reviewed by two members of management (production and QC) BEFORE we start production. This ensures that the most accurate information is delivered to the shop for processing.
•We have developed our own custom in-house management software that helps us service you during every aspect of your project. In addition to our in-house management software we also offer bending calculators on our website to assist with complicated bending computations such as spiral bending math.
•Our customers are our best sales staff- we frequently hear from our customers that bent materials provided by Albina are in better condition, less distortion and dimensionally more accurate when compared to previous experiences with competitors.
We would love to partner with you on your next project. Do not let distance be a deterrent, consider us your “local” bending partner and see how working with Albina Co. is unmatched by other bending companies.
Albina recently finished another phase of work for the new Stanford ChEM-H & SNI Building located on the Stanford University Campus. This latest phase consisted of 35,000# of bent HSS (rectangular and square tubing).
Tube Steel 12″ X 2″ X .250″ WALL A500 GR B, bent the easy way down to a 15 ft radius (cold)
Tube Steel 20″ X 12″ X .500″ WALL A500 GR B, bent the easy way down to a 100 ft radius
Tube Steel 14″ X 14″ X .375″ WALL A500 GR B, down to a 15 ft radius (cold)
To see artist renderings of the project and to learn more about the building’s design please visit GGN’s (Gustafson Guthrie Nichol) website. GGN is a landscape architecture firm based in Seattle, Washington.
Building The Amazon Spheres was a project that began in February 2013 and just this month The Spheres will officially open. Numerous Pacific Northwest businesses collaborated to make The Spheres possible. The Spheres website is officially live and you can explore not only the building and the many milestones during conception and construction, but also the very unique plant life that inhabits The Spheres. Albina Co., Inc. was the steel bender/roller for the Amazon Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!
Albina Co., Inc. recently bent 60,000# of Tube Steel 18″ X 6″ X .625″ WALL A500 GR B for the Young Living Global Headquarters in Lehi, Utah. Young Living Global is a world leader in producing essential oils and broke ground in May 2017 for its 263,000 square-foot, world-class building which was designed to complement Young Living’s philosophy of living harmoniously with nature. They focused on green initiatives in both the indoor and outdoor design.
“The care and detail that went into designing our headquarters was a collaborative effort to capture our Founder and Chairman of the Board D. Gary Young’s vision for an architectural representation of the spirit of wellness and abundance that Young Living embodies,” said Jared Turner, Young Living Chief Operating Officer. “I am certain this campus will be one-of-a-kind, inside and out; and we look forward to sharing it with our local community and all who wish to visit.”
We bent a total of 53 pieces and all of them were bent the easy way or spiral bent the easy way to as tight as a 43 foot radius. All of the steel material was bent to Architecturally Exposed Structural Steel standards.