RSS

Blog

Rolled Plate Creates Spiral Stair Stringers

Albina Co., Inc. recently rolled steel plate to create the spiral stair stringers for a beautiful custom curved steel staircase in California. The plate sections consisted of 1/2" x 14" A36 plate rolled counter clockwise to a 38' 8" radius and 43' 9" radius. For portions of the landing area, 1" X 14...

Curved Steel Bends for Marine and Locomotive Parts In Honor of Veterans Day

In honor of Veteran's Day, I thought I would share a PT-658 boat restoration project that Albina Co., Inc. participated in. Albina bends and curves steel parts used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports. One exa...

Spiral Stringer Bending with Almost NO Distortion

Albina Co., Inc. recently spiral bent a piece of tube steel 10" X 6" X .375" WALL A500 GR B. This is a very tight spiral bend with a lot of twist….almost NO distortion. With the assistance of an induction heat source, Albina was able to spiral bend the tube steel the Easy way to a 65” center line pl...

Curved Steel Canopy at St. Alphonsus Medical Center

St. Alphonsus Medical Center is non-for-profit hospital, serving Boise, and the surrounding communities in eastern Oregon and southwestern Idaho. Albina Co., Inc. recently bent several long lengths of tube steel to form a beautiful curved entry-way at the Joint Preservation & Reconstruction Center. [caption id="attachment_663" align="aligncenter" width="300"]St. Alphonsus Medical Center Curved Canopy St. Alphonsus Medical Center Curved Canopy[/caption] [caption id="attachment_664" align="aligncenter" width="300"]St. Alphonsus Medical Center Curved Canopy St. Alphonsus Medical Center Curved Canopy[/caption] ...

Curved Steel Pedestrian Bridges

Architecturally designed pedestrian bridges and walk-ways are often erected at transportation stations, universities, museums, business centers, and state parks. Most often, these curved steel bridges are constructed of bent or rolled structural steel including, pipe, square or rectangular tube stee...

Look Around: We've Got You Covered

When people ask me what I do and where I work, I get excited to tell them the answer because it almost comes as a surprise when I describe what our company does. When I say, " I work for a steel bending and fabrication company" many people look at me inquisitively and ask "so what does that mean?" S...

Oregon State University Student Experience Center Canopy

The bending portion of this project required very large HSS rectangular tubing to be bent consistently from piece to piece with little to no deformation. Albina bent 8 lengths of TS 20” x 12” x .500” wall A500 Gr. B, all over 70 ft long. Albina also bent 44 lengths x 60 ft and 23 lengths x 25 ft o...

Albina Co., Inc. Introduces Induction Heating Capabilities

The last few years of market growth have allowed Albina to increase our capabilities, our staff and to acquire some innovative new equipment and implement new processes on that equipment. We are proud to announce the newest bending technology at Albina, which is induction heating. Albina has u...

Porsche Design Tower in Sunny Isles Florida

Albina produced the elevator garage doors, the door frames, the upper/lower sills and several other parts for the safe operation of the door system for the Porsche Design Tower in Sunny Isles, Florida. Shaped like a piston driven into sand, the concrete-and-glass Porsche Design Tower will contain th...

Oregon State University "Student Experience Center Canopy"

Albina Co., Inc. recently provided the curved steel beams for an 8,000 square foot glass canopy at the Oregon State University (OSU) Student Experience Center, installed in Corvallis Oregon. The canopy links the new Student Experience Center with the Memorial Union. The canopy is not only functional...

Blog archive