Blog

How do you catch the attention of holiday shoppers this time of year?  Place a decorative, eye-catching, ornamental sign at the entrance to your shopping center! Albina Co., Inc. can help you vision become a reality. Albina Co., Inc. recently completed another ornamental curved steel sign for the  Village at the Peaks shopping center in Colorado. The curved steel materials included bent wide flange W12 X 79# A992 the hard way and bent tube steel TS 2" X 2" X .250" WALL A500 GRB. [caption id="attachment_706" align="aligncenter" width="300"] Curved Steel Sign Village at the Peaks[/caption]

Are you looking to build a new home or do a remodel to make your home stand out from the rest?  Think about using curved steel beams to give your roof line a unique, eye catching look.  Not to mention, the structural integrity of the curved steel beams is unparalleled when compared to other building materials. Albina Co., Inc, recently completed a project for a personal residence in California that involved splitting wide flange W12 X 30# A992 into WT6 X 15# and rolling stem in to a 75 ft radius. Albina also rolled tube steel TS 10" X 6" X .500" WALL A500 GR B the hardway to a 75 ft radius and wide flange W10 X 30# A992 the hardway to a 75 ft radius to create the curved roof trusses. [caption id="attachment_702" align="aligncenter" width="300"] Curved Steel Roof Trusses for Residential Construction[/caption] [caption id="attachment_701" align="aligncenter" width="300"] Curved Steel Roof Trusses for Residence in California[/caption]

Albina Co., Inc. recently completed various lengths of curved rectangular tube steel for the curved portion of the face of the new Harley Davidson building in Scottsdale, Arizona.   We also bent various internal structural steel elements for the interior of the building as well as a spiral staircase. [caption id="attachment_694" align="aligncenter" width="300"] Curved Steel Harley Davidson[/caption] [caption id="attachment_695" align="aligncenter" width="300"] Curved Steel Harley Davidson Facade[/caption] [caption id="attachment_696" align="aligncenter" width="300"] Spiral Staircase Harley Davidson[/caption] [caption id="attachment_697" align="aligncenter" width="300"] Curved Steel Harley Davidson Interior Structure[/caption]  

Albina Co., Inc. recently bent various sizes of tube steel to help create a beautiful curved steel pedestrian bridge in Woodburn, OR. Materials we worked with: TS 4" X 4" X .188" WALL A500 GR B. 65 lengths rolled anywhere from a 30 ft radius to a 300 ft radius. TS 4" X 2½" X .188" WALL A500 GR B. 28 lengths rolled anywhere from a 30 ft radius to a 120 ft radius. TS 4" X 1½" X .120" WALL A500 GR B. 36 lengths rolled anywhere from a 30 ft radius to a 300 ft radius. [caption id="attachment_690" align="aligncenter" width="300"] Curved Steel Pedestrian Bridge Woodburn, WA.[/caption] [caption id="attachment_691" align="aligncenter" width="300"] Curved Steel Pedestrian Bridge Woodburn, WA.[/caption]

Albina Co., Inc. recently rolled steel plate to create the spiral stair stringers for a beautiful custom curved steel staircase in California. The plate sections consisted of 1/2" x 14" A36 plate rolled counter clockwise to a 38' 8" radius and 43' 9" radius. For portions of the landing area, 1" X 14" A36 plate was rolled anywhere from a 37' 7" radius to a 42' 6" radius. Various other structural steel members were bent including 4" X 4" X ¼" ANGLE A36 rolled legout to a 37' 6" radius. [caption id="attachment_683" align="aligncenter" width="300"] steel spiral stair stringers from rolled plate[/caption] [caption id="attachment_684" align="aligncenter" width="200"] steel spiral stair stringers from rolled plate[/caption]

In honor of Veteran's Day, I thought I would share a PT-658 boat restoration project that Albina Co., Inc. participated in. Albina bends and curves steel parts used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports. One example includes, PT-658, the last remaining operable PT boat from World War II. Albina bent and donated 3/4" Sch40 Bare pipe bends to form a protective railing for the deck mounted guns and 5” OD x .120” wall stainless steel exhaust tubing for the Packard Diesel engines and 1/2” OD x .065” wall T304 stainless steel bends (coils) around the 5” OD stainless material to cool the extremely hot exhaust tubes. [caption id="attachment_673" align="aligncenter" width="224"] steel bending for pt boat WWII[/caption] [caption id="attachment_674" align="aligncenter" width="224"] steel bending for pt boat WWII[/caption] [caption id="attachment_675" align="aligncenter" width="300"] steel bending for marine application[/caption] [caption id="attachment_676" align="aligncenter" width="300"] steel bending for locomotive[/caption]

Albina Co., Inc. recently spiral bent a piece of tube steel 10" X 6" X .375" WALL A500 GR B. This is a very tight spiral bend with a lot of twist….almost NO distortion. With the assistance of an induction heat source, Albina was able to spiral bend the tube steel the Easy way to a 65” center line plan view radius. [caption id="attachment_667" align="aligncenter" width="225"] Tight Spiral Stringer with almost NO Distortion.[/caption]

St. Alphonsus Medical Center is non-for-profit hospital, serving Boise, and the surrounding communities in eastern Oregon and southwestern Idaho. Albina Co., Inc. recently bent several long lengths of tube steel to form a beautiful curved entry-way at the Joint Preservation & Reconstruction Center. [caption id="attachment_663" align="aligncenter" width="300"] St. Alphonsus Medical Center Curved Canopy[/caption] [caption id="attachment_664" align="aligncenter" width="300"] St. Alphonsus Medical Center Curved Canopy[/caption]

Architecturally designed pedestrian bridges and walk-ways are often erected at transportation stations, universities, museums, business centers, and state parks. Most often, these curved steel bridges are constructed of bent or rolled structural steel including, pipe, square or rectangular tube steel, channel and wide flange. It depends on the application, the load requirements the AESS (Architecturally Exposed Structural Steel) requirements, and fabrication specifications of the project to determine which type of structural steel will best fit the needs of the project. [caption id="attachment_655" align="aligncenter" width="300"] Dry Creek Pedestrian Bridge [/caption] [caption id="attachment_659" align="aligncenter" width="300"] Ironwood Pedestrian Bridge[/caption] [caption id="attachment_658" align="aligncenter" width="300"] HWY 36 Pedestrian Bridge[/caption] [caption id="attachment_657" align="aligncenter" width="300"] May Creek Pedestrian Bridge[/caption] [caption id="attachment_656" align="aligncenter" width="300"] Museum of Flight Pedestrian Bridge[/caption]

When people ask me what I do and where I work, I get excited to tell them the answer because it almost comes as a surprise when I describe what our company does. When I say, " I work for a steel bending and fabrication company" many people look at me inquisitively and ask "so what does that mean?" Since many of the products we make require someone to look above eye level, my common response is "next time you are outside, look up, look around, any time you see bent steel on a canopy, a roof truss, a store front...those are the kinds of things we make." Many people go as far as to comment, "I never really thought about the fact that the steel has to be bent somehow!" So next time you look up and see a curved steel structure, think of Albina. "We've Got You Covered!"