Blog

The NCSEA (National Council of Structural Engineers Associations) awarded the Newport Beach Civic Center and Park with the “Outstanding Project Award for New Buildings Over $100 Million.” Albina Co., Inc. was the bender/roller for the iconic curved wide-flanged waved roofs that line the façade of the building. The AISC (American Institute of Steel Construction) recognized this same project as a 2014 IDEA National Award Winner in the Spring of 2014. Architect: Bohlin Cywindski Jackson Structural Engineer: Arup Fabricator: SME Steel Contractors Bender/Roller: Albina Co., Inc. 352,000# of rolled steel by Albina • W10 x 26#- 502 pcs all rolled the hardway to AESS standards. Rolled down to a 16 ft radius. • TS 3” x 3” x .250” wall- 502 pcs rolled to match the W10 x 26#. • WT 3 x 13.5#- 158 pcs split from W6 x 27# (by Albina) and rolled Stem-in and Stem-out down to a 15 ft radius. • TS 8” x 8” x .500” wall- rolled to AESS standards • TS 6” x 6” x .250” wall- rolled to AESS standards • TS 8” x 8” x .375” wall- 60 pcs rolled to AESS standards

The NASCC (North American Steel Conference) is set to take place in Nashville, TN March 25th-27th this year. The NASCC (North American Steel Conference) is the premier place for engineers, fabricators, detailers and erectors to learn about structural steel design and construction, to interact with their peers and to see the latest products for steel buildings and bridges. Various technical and educational sessions are offered for attendees in addition to the extensive trade show. Sign up today at www.aisc.org.

Albina Co., Inc. bent 42,000# of curved hallow structural steel all of which will be Architecturally Exposed for the Warm Springs BART Pavilion Building expansion project located in Fremont, California. The bent structural material consisted of TS 10" X 4" X .500" WALL A500 GR B bent to a 29’ 9½” radius the easy way and TS 10" X 6" X .375" WALL A500 GR B bent to a 27’ 9½” radius the easy way.

In the November 12th edition of the Daily Journal of Commerce, it was referenced that many of the judges felt that the Design Awards projects entered by the Portland AIA Chapter lacked innovation, attention to urbanism and needed a higher level of design for both interiors and exteriors. However, the one project that received praise from the judges was the Award Winning Edith Green-Wendell Wyatt Federal Building renovation. The project received a merit award for what the judges considered a "thoughtful transformation that incorporated many sustainable elements." Albina was the bender/roller on this awarding winning project.

Albina Co., Inc. recently bent the spiral stringers, handrails, second floor guardrails, and observatory guardrails for the Science Community Center Observatory at Modesto Junior College in Modesto, CA.

Elliptial/Parabolic steel bending occurs when the material is bent in one plane, but the radius changes throughout the arc. A radius is the line segment that joins the center of a circle with any point on the materials circumference (see Center-Line Radius). Arc is defined as the curved portion of a bend. Below are some examples of elliptical/parabolic bends.

Albina Co. Inc. is the #1 supplier of rolled plate for various applications: Casing Cylinders Rolled Plate Cylinders Stiffeners Curved Plate Sections for Earthquake Retrofits Concrete Column Wraps Tunnel Shoring Applications Tunnel Supports Tunnel Framework/Skeleton Column and Bridge Supports Cones Other Plate Formed Sections

The Northwest Environmental Conference and Trade Show is coming to Portland, Oregon December 9th and 10th. The region's conference for environmental, operations, and sustainability professionals, NWEC provides companies with information they need to stay competitive and ahead of the curve. Now in its 26th year, this signature event is presented by NEBC, Associated Oregon Industries, Oregon Dept. of Environmental Quality, and the Washington Dept. of Ecology. The educational component of the conference focuses on best management practices and advanced topics in environmental protection & compliance, sustainable business management, current & emerging policy issues, and the latest technologies & services. NWEC also includes the region's largest environmental trade show.

Albina Co., Inc. has developed an online ordering program for Duct System and Component Parts. Stocked items (angle rings, plate flanges and cut-offs) can now be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax. Streamline your ordering process by logging onto our website to request an account and begin the online ordering process.

A wide variety of mounting options, tooling sets and finishes allow us to produce a custom bike rack to fit your needs and specifications. We produce custom bollards for urban traffic and vehicle control, barriers and barricades, pedestrian security, ornamental landscape structures and bike rack solutions. We specialize in playground equipment including spiral climbers, arch caps, manufactured parts and custom design applications.