Blog posts tagged with 'Structural Steel Bending Profiles'

We bend all sizes of angle that the mill produces, up to 8” x 8” x 1¼”. We can bend all types of angle as well; including aluminum, stainless and carbon steel. Carbon angle (mill produced) is classified as ASTM A36 resulting in a yield point (PSI) of 36,000 minimum. We bend all stock lengths as well as non-stock lengths. Stock lengths range from 20 to 40 feet. Angle is produced with equal legs and unequal legs. Unequal legs would measure differently on the horizontal leg versus the vertical leg. We have the ability to bend angle with the leg in, leg out, heel in, heel out and heel up. We also have the ability to bend bulb flat. Bulb flat is similar to angle with one of the legs cut down to a very short "stub". We can bend bulb flat with the stem out and the stem in. We can bend all mill sizes produced up to 430 mm x 20 mm (16.93” wide x .787” thick). Bent angle can be used for many different applications. The most common application would be angle flanges which are full circles that are used to join sections of pipe together. Bent angle is also used for canopies, roof trusses and tunnel shoring applications.

Albina bent 55,000# of wide flange W24 X 76# A992, W30 X 108# A992, W36 X 135# A992, W36 X 170# A992 for the Murray Park Amphitheater in Salt Lake City, Utah. Over a planning period that lasted several years, the city received input from patrons and citizens that focused on the needs and wants for improvements to the amphitheater. The largest improvement to the amphitheater was a curved steel roof over the stage and orchestra pit. “In the summer, we have microburst storms that roll in at around three or four in the afternoon and rain out events,” Sorenson said. “The stage can also get very hot, which limits what you can do in the afternoon. If we had a roof, we wouldn’t have to cancel. It would allow us to keep events running.” One of Albina Co., Inc.'s slogans over the years is "We've Got You Covered" and in this instance, we truly did! The wide flange was all bent the hardway to a radii range of approx. 90 ft – 100 ft. and it was all bending to AESS (Architecturally Exposed Structural Steel Standards).

We recently completed a project consisting of 82,000# of bent steel for "The Village Medford Center" in Medford, Oregon. The Village is the center of a major environmental and architectural transformation at Medford Center, which is the premier entertainment-oriented shopping and dining experience in Medford, Oregon. Part of the architectural upgrades included a new dynamic sign program featuring an arched entryway with an illuminated pendant pine cone sculpture and a new 80-foot tall architectural tower, that will be visible from the I-5 freeway. We rolled 24 lengths of Tube Steel 16" X 8" X .500" WALL A500 GR B the Hardway to a 42 foot inside radius. All material was bent to AESS standards (without heat)! We also rolled 16 lengths of Tube Steel 6" X 6" X .500" WALL A500 GR B down to as tight as a 27 foot radius.

We were recently floating the Deschutes River in Bend, Oregon and after a day of fun, we decided to go grab lunch and cool beverage at one of our favorite locations, 10 Barrel Brewing. As we looked at the menu, and admired the new remodel of the restaurant, we noticed the beer taps! We recently bent 1-1/2” OD x .065 wall T304 Stainless steel #4 finish. These are 90 degree bends on a 2-3/4” Center line radius. How exciting to see our work on display at such a hip location on Galveston Street!

$11 million Carmel, California 'Serenity' house for sale! Back in 2012, Albina bent wide flange W12 x 30#, W12 x 26# and W12 x 50# to help create the amazing exterior of this home. We bent 42 pieces the hardway to various radii as tight as 116 feet. The 2667 square foot home sits atop a cliff in Carmel, in central California. The exterior takes inspiration for its curves from the butterfly. The curved steel of the exterior has a unique effect on the interior spaces, making for interesting corridors and seating areas. I have several images of the project in process below, and I am working on securing the listing images and will post them as soon as I can. Until then, click on the following link to enjoy looking at the stunning images of a Butterfly-Inspired House on the California Coast!

We recently completed a handrail project for a walkway around the Vancouver, Washington waterfront park. The projected consisted of 12 pieces of 2½" SCH40 T304 S/S 18 pieces of 1¼" SCH40 T304 S/S 17 pieces of 2½" SCH40 A53B ERW 26 pieces of 1¼" SCH80 A53B ERW We bend handrails for commercial, recreational, transportation and residential applications. Handrail Kits Are Available: Bent and trimmed per drawing, mid-rails trimmed and coped, assemblies supplied as individual parts or fabricated complete. Call us for your next handrail project!

Phase 1 of the Newberg/Dundee Bypass road in Oregon includes more than ten bridge structures, where the bypass crosses over creeks, wetlands, railroads, or travels over or under other local roads. The Corridor Theme is “Meandering River and Rolling Hills.” The theme includes an open form for bridge structures, which allows views for drivers under the structure and provides opportunities for smooth transitions into the surroundings. A “meandering river” concrete relief is stamped into the concrete railing and an ornamental “rolling hills” design is used where screening is required. That is where we come in! We rolled various tube steel to create the “rolling hills” on the bridges. We rolled: 16 lengths of tube steel 10" X 4" X .375" WALL A500 GR B (30 pcs total) bent the hard way to 15 different radii from 9 ft to 158 ft. 9 lengths of tube steel 12" X 8" X .375" WALL A500 GR B (16 pcs total) bent the hard way to 5 different radii from 28 ft to 58 ft. 19 lengths of tube steel 3" X 3" X .313" WALL A500 GR B (56 pcs total) to 26 different radii from 5 ft to 200 ft.

We recently bent 6" SCH10 A53A ERW rolled to a 4’ 0” radius. We were instructed to bend the material in 180° sections and the customer was then going to make them into full circles. It is our understanding that these rings will be hung from the ceiling, painted and wrapped in ribbon for a Hulu convention. </a

We recently spiral bent tube steel 12" X 8" X .625" WALL A500 GR B Spiral the Easy way to a 173” radius for a customer spiral staircase located in Utah. Square and rectangular tubing is also known as HSS (hollow structural steel). Albina has the ability to bend both square and rectangular tubing. For rectangular tubing we can bend both the easy way (against the weak axis) and the hard way (against the strong axis). We can even provide Multi-Plane bending where we are bending both the easy way AND the hard way. Albina is a unique shop in that we can bend very small square materials such as TS ½” x ½” x .049” wall all of the way up to very large materials such as TS 20” x 12” x .625” wall, which happens to be the largest size that mills produce. Albina actually has a larger capacity than TS 20” x 12” x .625” wall, which means we can bend materials larger then what the mills produce!