Blog posts tagged with 'rolled metal'

Albina recently rolled 89 pieces of plate to various radii (with holes) to fit on concrete columns for the Stonestown Galleria mall in San Francisco.
Our customer recently shared the below photos of the rolled plates and had this to say, “I just wanted to share that every single plate has fit phenomenally with no issues. I appreciate your companies attention to quality control and detail. We look forward to continuing to work with Albina on future projects.”

Check out the August Issue of Modern Steel for “What’s Cool In Steel” Albina was the bender/roller on two of the featured projects including the Basher Pedestrian Bridge at the San Diego Zoo (pages 23-26) and a Des Moines sculpture titled “A Monumental Journey” by artist Kerry James Marshall (pages 30-31). We are working on securing some final install pictures of each of these projects! Stay tuned!

We recently worked with a customer on a unique project where they required curved Unistrut. We were able to successfully roll 1 5/8" X 1 5/8" GALVANIZED UNISTRUT the hard way to a 168” radius. A unique material for rolling! We figured out a way to maintain the shape while rolling and were able to bend 116 lengths! We received a comment from our customer that “no one at the jobsite had ever seen Unistrut curved before!"

We were in Seattle this weekend and were able to get some exterior pictures of The Madison Center. The Madison Center is a 530 foot tall, 36 story high rise office building in Seattle, Washington and is featured in the June edition of Modern Steel. Albina Co., Inc. was the bender/roller on this project and worked specifically on what is being called "The Great Room" which is a 45-foot tall steel framed entryway rotunda. Albina bent many material types for this project including tube steel 8" x 6" up to 12" x 12", 3" x 3" angle, W10 and W16 wide flange, 8" pipe and more. Check out the article for some more details on the architectural feat and some great pictures. We will be heading back up to Seattle next week to get some interior shots. Stay tuned!

Albina Co., Inc. bent at total of 24,000# of steel including 12 ¾" OD x .375" wall material and MC12 x 10.6# material for the new steel-framed UCHealth Longs Peak Hospital in Longmont, Colorado. The project is featured in the July issue of Modern Steel Construction and the article details many of the structural design challenges as well as the importance of early involvement of specialty fabricators.

The last few years have been sensational for Albina Co., Inc. We have seen a great deal of change in our industry and have been fortunate to recognize growth in our capabilities, capacity and in both our shop and office team members. We are excited to introduce the newest member of our Estimating / Project Management team, Joseph (Joe) Daniels. Joe is joining Aaron Hughes, Mark King, Brad Lund, Stuart Hasman and Brian Smith in Albina's Sales department. Joe has many years of experience in the steel and fabrication industry and has worked in Albina's shop, as an Ironworker, since July 2014. Joe has developed an outstanding reputation at Albina and will be a welcomed addition to our outstanding sales and estimating team. Joe possesses a comprehensive work ethic and will service Albina's customers just as you have grown accustomed to from the other members of our team. We are confident Joe's commitment to quality and integrity will make him a valuable resource as our company and your business continue to grow. You can contact Joe or any of our other existing sales staff with your estimating and technical needs at 503-692-6010. Joe's email is jdaniels@albinaco.com. Thank you for your continued support.

Check out the cover spot and three page feature article on Albina Co., Inc. in the June/July West Coast Edition of A2Z Manufacturing Magazine. Pages 24-26! Portland artist Devin Laurence Field produced the laser-­cut stainless steel flame sculpture and Albina Co., Inc. bent 18" STD A53B ERW 10 lens x 40 ft down to a 42 ft radius for the sculpture.

We had such a great time working with Linda and Kim to highlight and showcase all of the amazing curved steel projects we have done in Oregon, Washington, and California. Some projects featured in the article include:

I'm proud of my hard work. Working hard won't always lead to the exact things we desire. There are many things I've wanted that I haven't always gotten. But, I have a great satisfaction in the blessings from my mother and father, who instilled a great work ethic in me both personally and professionally. -Tamron Hall

Father's Day is upon us! Father's Day is particularly important to me as I lost my father, Bill, over 8 years ago, and there isn't a day that goes by that I don't think about him or get a reminder of him while at work. It can be a phone call from someone in the industry who used to work with him, it can be an old quote I see come across my desk with his name on it, it can be my daily rounds through the shop where I can still see him problem solving with a machine operator on a particularly challenging job. Whatever it may be, I always remind myself that I am a representative of the Smith Family and the steel bending business that my grandfather and father helped to build. Jaime and I have been building on their values for many, many years now and feel great about where we have been able to take the business. All three generations have worked in both the shop and office during our careers. A fourth generation spends their summers pulling weeds, washing windows and doing database entry in their spare time. We have four generations of family who believe in the steel industry and believe in the value of hard work. I have no idea if my son and daughter will be interested in taking over the family business some day, but if they do, I am confident that they will work hard, be honest and carry on the traditions we have lived by for the last 80 years! I am a proud business owner and a proud Father. Happy Father's Day to all you Father's out there!

Check out the cover spot and three page feature article on Albina Co., Inc. in the June Rocky Mountain Edition of A2Z Manufacturing Magazine. Pages 18-20! We had such a great time working with Linda and Kim to highlight and showcase all of the amazing curved steel projects we have done in Colorado, Utah, Idaho, Montana and Wyoming. Some projects featured in the article include:

The Vancouver Waterfront Project and Grant Pier Fabricator A2 Fabrication Earns 2019 Earnest Wiemann Gold Top Job Contest Award! 
Albina bent 2½" SCH40 T304 S/S, 1¼" SCH40 T304 S/S, 2½" SCH40 A53B ERW and 1¼" SCH80 A53B ERW for the curved steel handrails. We cut and bent the steel per the drawings and protected the finish of material during production and for shipping by wrapping the curved steel in foam and cardboard to keep parts from rubbing against each other. We bend handrails for commercial, recreational, transportation and residential applications. Handrail Kits Are Available: Bent and trimmed per drawing, mid-rails trimmed and coped, assemblies supplied as individual parts or fabricated complete. Call us for your next handrail project!