Blog posts tagged with 'square and rectangular tube bending'

Albina provided 109,000# of bent steel for the Eli Lilly San Diego Biotech Center in La Jolla, CA. Eli Lilly doubled the size of its research facility to 300,000 square feet during this project. Materials included: 8″ X 8″ X 5/8″ ANGLE A36- half of the parts rolled leg in and half of the parts rolled leg out. Tube Steel 8″ X 8″ X .500″ WALL A500 GR B 8 5/8″ OD X .625″ WALL A500B Wide Flange W16 X 57# A992- Split into WT8 and rolled some parts stem in and rolled some parts stem out. Wide Flange W24 X 103# A992- DOUBLE split to a finished height of 8¼” tall. Albina then rolled some parts stem in and other stem out.

Albina bent 45,000 lbs. of steel for the Chase Center- Home of the Golden State Warriors. Materials bent included Tube Steel 2" X 2" X .250" WALL A500 GR B, Tube Steel 14" X 14" X .500" WALL A500 GR B, Tube Steel 3" X 3" X .375" WALL A500 GR B, and Tube Steel 12" X 12" X .500" WALL A500 GR all bent to a 270 ft radius. The stadium is located in the Mission Bay area of San Francisco.

The college tours continue and a few weekends ago, we had the pleasure of visiting Oregon State University in Corvallis, Oregon and seeing the curved steel canopy at the Student Experience Center.

The project was bent out of TS 20" X 12" X .500" WALL. Bent the hard-way to the tightest radius of 101'-8" inside. Always fun to see our handy work in person!

“It is so fun to drop in!” Sherwood Skate Park just opened and it is awesome! Filled with kids every day! Albina was thrilled to be a part of the project bending 4 lengths x 20 ft. Tube Steel 2" X 2" X .188" WALL A500 GR B to a 42 ft radius and a 46 ft radius, as well as 3 lengths x 21 ft.: 2" SCH40 A53B ERW bent to a 12 ft radius and a 5 ft radius, for the lip/rail that runs the perimeter of the park as well as for the benches kids sit and skate on.

Albina recently completed a great project for a curved steel roof at the M-Car Wash in Davie, Florida

Materials bent for this project included Tube Steel 10" X 4" X .250" WALL A500 GR B yielding 3 pieces. Albina cut the material to length, prepped and primered each piece. Tube Steel 10" X 4" X .375" WALL A500 GR B- yielding 12 pieces bent the hard way.  Albina's scope of work was to bend, trim, holes, weld caps and grind per drawings.  NOMMA #1 finish welds.  Prep and prime paint after fabrication.  Exposed. We also bent 3" SCH40 A500 GR B to yield 15 assemblies.  Albina Cut, Fit, weld and grind per drawings.  NOMMA #1 finish.  Prep and Prime after fabrication.

One of Southern California's iconic, flagship waterfront restaurant sites - 1360 North Harbor Drive along the North Embarcadero, is getting a facelift! The Port of San Diego and The Brigantine, Inc. began construction in July 2018 to redevelop Portside Pier including introducing four new dining concepts and enhancing the panoramic views of San Diego Bay for daily visitors. Albina Co., Inc. provided 60,000 pounds of various bent materials for the unique curved roof structure as well as for two signature spiral staircases that leads from the dock to the second floor public walkway and viewing deck.

Materials bent by Albina Co., Inc. included:
TS 14" X 6" X .500" WALL A500 GR B (6 pieces spiral bent the easy way as tight as a 17 ft plan view radius, 4 pieces bent the easy way as tight as a 17 ft inside radius).
TS 12" X 6" X .500" WALL A500 GR B (8 pieces bent the easy way as tight as a 2’ 7” outside radius, 8 pieces spiral bent the easy way as tight as a 2’ 7” plan view radius).
TS 8" X 8" X .500" WALL A500 GR B (84 pieces bent to various radii and configurations).
TS 18" X 6" X .375" WALL A500 GR B (4 pieces bent the hard way).
W10 X 12# A992 (9 pieces bent the hard way).
W18 X 35# A992 (15 pieces bent the hard way).
W16 X 26# A992 (2 pieces bent the hard way).
W14 X 22# A992 (13 pieces bent the hard way).

Albina recently bent various materials including tube steel, flat bar, pipe and angle for the Calvary Chapel in Ontario, Oregon. The Calvary Chapel is right on the Idaho border. Our bent material helped to create a lovely curved steel canopy for the chapel.

Materials Bent Include:

TS 10" X 3" X .375" WALL A500 GR B (7 lengths x 48 ft- bent the hard way to a 66 ft radius).

FB ½" X 4" A36 (2 lengths x 20 ft- bent the hard way to a 66 ft radius).

8" SCH40 A500 GR B (1 length x 42 ft).

TS 6" X 2" X .188" WALL A500 GR B (5 lengths x 48 ft).

1" X 1" X ¼" ANGLE A36 (6 lengths x 20 ft).

“A Monumental Journey” by Kelly James Marshall for the Greater Des Moines Public Art Foundation. The monument is featured in the August issue of Modern Steel “What’s Cool In Steel.” The monument celebrates the legacy of African American laywers who founded the the National Bar Association in 1925 and the monument symbolizes communication among diverse people and legal system, that while not perfect, strives to be balanced. Find more details about the project in the above article featured in Modern Steel.
Albina bent various materials for this project including:
3 x 40 ft: 5" X 5" X 5/16" ANGLE A36. Cut and bent to net 8 pcs (leg out). Bent down to a 68” inside radius.
1 x 20 ft: MC3 X 7.1# A36. Cut and bent to net 2 pcs (flanges in).
2 x 48 ft: TS 6" X 6" X .625" WALL A500 GR B. Cut and bent to net 4 pcs. Bent down to a 58” inside radius.
1 x 48 ft: TS 6" X 6" X .375" WALL A500 GR B. Cut and bent to net 2 pcs. Bent down to a 77” inside radius.

Kerry James Marshall (American, born 1955) A MONUMENTAL JOURNEY 2018 Manganese Ironspot brick, steel, granite approx. H. 30 ft, D. 19 ft

Commissioned by Greater Des Moines Public Art Foundation; Greater Des Moines Public Art Foundation Collection, 2018.1 Photos: Ben Easter

“The Spheres”, the recipient of the AISC 2019 IDEAS2 Presidential Award for Excellence in Fabrication grace the cover of the August Issue of Structure Magazine! The article focuses on the inspiration, the vision and the design of "The Spheres." Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis for this project. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! Numerous Pacific Northwest businesses collaborated to make The Spheres possible.

Albina recently bent some Tube Steel 6" X 3" X .500" WALL A500 GR B as double 90° bends to a 17" inside radius the hard way. These are difficult, tight bends for this material and the bends turned out perfectly! The bends will be used as vestibule frames for a lobby entry.