Blog posts tagged with 'Pipe Bending'

The reemergence of the sunshine and warm weather in Oregon has seemed to also generate some very large Structural Steel, Plate, Pipe, Square and Rectangular tubing projects.  Many of these projects also include some supplemental fabrication work.  Supplemental fabrication projects typically involve ...

Kickstands are overrated! Albina Co., Inc. can manufacture your bike racks to specifications listed by designers and architects. We have the ability to bend pipe and tube, flat bar, square and rectangular tubing, plate and all other forms of structural steel. We have the capacity to do large runs of...

Albina, located outside Portland, Oregon, has been providing customers with innovative, quality bent steel products since 1939 and we are celebrating 75 years in the steel industry! A family owned and operated bent steel, metal tube bending and pipe bending company that can produce virtually any met...

Alibna recently bent 1¼” OD x .065” wall T304 stainless steel for custom vacuum parts. Albina then added several "value add" services including trimming, machining one end after the trim, and deburring and breaking all edges post machining. ...

At Albina Co., Inc. we pride ourselves on providing the best customer service in the steel bending industry. Below are two recent emails we received from customers: "Thanks for the interesting and impressive update on Albina! I remember getting quotes and visiting the shop when it was on Halsey S...

Albina Co., Inc. bent several pieces of custom pipe for the brand new marquee at the Moda Center, home of the NBA Portland Trailblazers. Installation of the marquee began on March 20th and the new lighting is targeted for next week. In addition to the Moda Center sign, Albina has produced sev...

Albina was just awarded another project consisting of 1,050 pieces of 2" OD X .065" WALL 6061-T6 ALUM. These parts are being processed complete by Albina (cut, bent, trimmed, drilled and machined) and the work was moved to Albina from China because the customer required better quality and a more fa...

Albina Co., Inc. recently cut, bent, trimmed, weld marked and galvanized 30,000# of bent pipe and tube for a post tensioning piping (conduit) project. Materials we processed included: 5" OD X .250 WALL A500 GR. B, 4½" OD X .237 WALL A500 GR. B, and 3½" OD X .216 WALL A500 GR. B

...

Albina Co., Inc. recently bent, trimmed and tack welded 48 pieces of 1" Sch40 A53B ERW pipe to create steam coils for sulphur melters. Sulphur melters are either above ground tanks or inground pits with steam coils for melting the sulphur. Coils may be fabricated in trombone, helical and other shap...

Albina Co, Inc. recently rolled 1½" solid square to 8" ID with a 75° pitch around a piece of pipe for Fogle Pump & Supply.   They were so pleased with the work that we did, here is what they had to say:   "Just a quick note to say Thank You for your help and fortitude to get this job fin...