Blog posts tagged with 'Spiral Stringers'

Albina Co., Inc. recently rolled 16 pieces of 5/8" plate A36 to as tight as a 162" radius. Six pieces of plate were used as the inside stringers of a beautiful spiral staircase at Altar'd State at the Forum Shops at Caesar's Palace. Six pieces of plate were used as the outside stringers of the sta...

Albina Co. Inc. bent the spiral staircases at the newly renovated Space Needle in Seattle, Washington. The Space Needle's rotating glass floor, dubbed "The Loupe", is located just below the open-air observation deck and Albina Co., Inc. was the steel bender/roller for the custom spiral staircases ...

The Albina Co., Inc. team recently spiraled a true HSS stair stringer to a very tight configuration for a spiral staircase project in Washington. The project consisted of using an induction heat source, on our custom made bending equipment, to spiral bend tube steel 16" X 12" X .625" WALL A500 GR ...

Back in June, I posted a picture of some induction heating process, for the new American Airlines headquarters in Fort Worth, Texas. In addition to the 16" square, we produced another set of 

The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of constructing four s...

We recently spiral rolled 1/2" and 1" plate for a custom spiral staircase in a multi-million dollar luxury home on Green Street in San Francisco, California. We provided the rolled plate for the staircase and then flat plane rolled the plate for the landings. The tightest radius was a 29.75” center ...

Albina recently used our induction heating process to spiral bend Tube Steel 16" X 16" X .625" WALL A500 GR B bent down to a an 18 foot radius for the new American Airlines headquarters in Fort Worth, Texas. The 1.7 million-square-foot complex, dubbed the “Trinity complex,” consists of constructing ...

Suffolk County Community College (SCCC), recently opened its new $30 million, 75,000 square foot Learning Resource Center (LRC) and library on the Michael J. Grant Campus in Brentwood, Long Island, New York. Albina Co., Inc. bent the steel spiral stringers for the project. The steel spiral stringer...

On a recent trip to Washington DC, we had the pleasure of touring the Capitol Building and we were able to capture some pictures of The Capital Visitors Center spiral staircase we bent years ago. The project consisted of flat and spiral bending of angle, channel, flat bar, solid square, wide flange ...

Orange Coast Memorial Medical Center is the only nonprofit hospital in Fountain Valley, CA. Albina recently spiral bent and flat bent Tube Steel 16" X 8" X .500" WALL A500 GR B to 13’ 6” and 18’ 10” plan view radii the easy way to form the spiral stringers for the staircase. See the installation pic...

Enjoy the latest install pictures of the 20” x 8” x .625” wall tube steel which provides the base supports for a heavy weight bearing spiral staircase at the Lakeside Campus in Richardson, Texas. The tube steel was spiral bent the easy way using our induction heat source and increment bend method. T...