When people ask me what I do and where I work, I get excited to tell them the answer because it almost comes as a surprise when I describe what our company does. When I say, ” I work for a steel bending and fabrication company” many people look at me inquisitively and ask “so what does that mean?” Since many of the products we make require someone to look above eye level, my common response is “next time you are outside, look up, look around, any time you see bent steel on a canopy, a roof truss, a store front…those are the kinds of things we make.” Many people go as far as to comment, “I never really thought about the fact that the steel has to be bent somehow!” So next time you look up and see a curved steel structure, think of Albina. “We’ve Got You Covered!”
The bending portion of this project required very large HSS rectangular tubing to be bent consistently from piece to piece with little to no deformation. Albina bent 8 lengths of TS 20” x 12” x .500” wall A500 Gr. B, all over 70 ft long. Albina also bent 44 lengths x 60 ft and 23 lengths x 25 ft of TS 6” x 3” x .313” wall A500 Gr. B, this material was “double bent” the easy-way and the hard-way. Fought & Co., a structural steel fabrication shop located in Tigard Oregon, teamed up with Albina to successfully produce the required canopy. Albina was tasked with the steel bending while Fought was tasked with the fabrication.
Albina recently published an article in Metal Architectural (click here to read) highlighting the Student Experience Center Curved Steel Canopy project.
Albina Co., Inc. recently provided the curved steel beams for an 8,000 square foot glass canopy at the Oregon State University (OSU) Student Experience Center, installed in Corvallis Oregon. The canopy links the new Student Experience Center with the Memorial Union. The canopy is not only functional (allowing for a protected space when it is raining during outdoor events) but also a signature structure on the Oregon State University campus. The bending portion of this project required very large HSS rectangular tubing to be bent consistently from piece to piece with little to no deformation. Albina bent 8 lengths of TS 20” x 12” x .500” wall A500 Gr. B, all over 70 ft long. Albina also bent 44 lengths x 60 ft and 23 lengths x 25 ft of TS 6” x 3” x .313” wall A500 Gr. B, this material was “double bent” the easy-way and the hard-way. Fought & Co., a structural steel fabrication shop located in Tigard Oregon, teamed up with Albina to successfully produce the required canopy.
Albina Co., Inc. recently completed a project involving various curved tube steel to create a state-of-the-art car canopy at the UCSF Medical Center in San Francisco, CA. Albina Co., Inc. bent tube steel 5″ X 3″ X .375″ WALL A500 GR B and tube steel 5″ X 3″ X .250″ WALL A500 GR B for the project. All of the material was rolled the hard way to AESS (Architecturally Exposed Structural Steel) standards.
World of Speed, a nonprofit experiential motor sports exposition, purchased an 80,000 square foot building in Wilsonville, Oregon as the permanent home for an auto racing and performance car tourism destination and an auto industry educational program. A local contractor partnered with Albina Co., Inc. to have us bend the curved steel canopy on the top of the building. Materials consisted of 6″ SCH80 A53B rolled to a 48’ 4” center-line-radius. The customer will net 78’ 4” of bent material. All roll material is Architecturally Exposed Structural Steel. Click on their site, World of Speed for more information about the World of Speed and the new museum.
First article approval nearly complete on a 44′ X 13′ football shaped bus shelter canopy. The complete assembly includes various materials. The main canopy frame is assembled from Rolled / Bent Steel HSS members to AESS quality, and large diameter support columns with rolled / bent round tubing knee braces.
Albina and Cundiff Steel Fabricating & Erecting provided 36,000# of TS 16″ x 8″ x .375″ wall, TS 16″ x 8″ x .500″ wall, TS 10″ x 8″ x .250″ wall, and TS 16″ x 16″ x .375″ wall all AESS for a canopy at St. Jude’s Hospital. Cundiff Steel had the following comments about working with Albina: ” I want to thank you guys for sticking with us on this project. It drug on for a long time and Aaron rebid it several times as we went through headache after headache with the engineers. I feel he went above and beyond to help us get this project on track. It took a lot of correspondence back & forth to get everything dialed in & Aaron was very helpful through all of it. The lead time from finally getting you approved drawings to us receiving the material was much less than we expected. Also, I appreciate the time Aaron took when I visited to show me the material and provide a tour of the facility to see how it all works. Thanks again for the great service.” CHARLIE PISCOPO, V.P. Operations Mngr, Cundiff Steel Fabricating & Erecting