Blog posts tagged with 'bent steel'

Kickstands are overrated! Albina Co., Inc. can manufacture your bike racks to specifications listed by designers and architects. We have the ability to bend pipe and tube, flat bar, square and rectangular tubing, plate and all other forms of structural steel. We have the capacity to do large runs of wave racks and staple racks. We can also produce to your custom design. A wide variety of mounting options, tooling sets and finishes allow us to produce a custom bike rack to fit your needs and specifications. [caption id="attachment_444" align="aligncenter" width="300"] pipe bends for custom bike rack[/caption] [caption id="attachment_445" align="aligncenter" width="300"] pipe bends for custom staple bike rack[/caption] [caption id="attachment_446" align="aligncenter" width="300"] pipe bends for custom wave bike rack[/caption]

Albina, located outside Portland, Oregon, has been providing customers with innovative, quality bent steel products since 1939 and we are celebrating 75 years in the steel industry! A family owned and operated bent steel, metal tube bending and pipe bending company that can produce virtually any metal component that needs to bend or curve without the use of pre-formed fittings. Albina's number one goal is to provide customers with competitively priced, quality products, on time. Regardless of the order size, your individual specifications and requirements will be met. With over 12 decades of combined experience Albina's friendly, qualified staff has the ability to meet all of your bent steel and metal rolling and fabrication needs. If you are in the area, we would love for you to stop by and take a tour of our shop!

Albina bent and fabricated various structural materials to create the floor supports and decking for a custom tree house in Sammamish, Washington. Materials used included: a) 3-1/2″ Sch80 and 5″ Sch80 Bare Pipe fabricated complete per drawings with brackets cap welded to ends b) 1/2″, 3/4″ and 3/8″ Rolled Plate c) Tube Steel 8″ x 4″ x .250″ Wall A500 GR B d) W6 x 15# A992 and W8 x 15# A992 Wide Flange Here are some updated pictures from the installation. Final install pictures coming soon!

At Albina Co., Inc. we pride ourselves on providing the best customer service in the steel bending industry. Below are two recent emails we received from customers: "Thanks for the interesting and impressive update on Albina! I remember getting quotes and visiting the shop when it was on Halsey Street, 30-some years ago, and thought it was cool to watch them bend small pipe. Looking at these pictures shows how far your company has come. This is really interesting stuff! A guy would look forward to coming to work every day to do something this impressive. Keep up the wonderful work!" "We just received the parts yesterday and want to say thank you. Aaron, Mark, Mike and many of your other staff have done an excellent job of taking care of us over the years. They are prompt, friendly and most important professionals who turn out a GREAT product!!! We look forward to doing many more projects over the years." If you want to deal with the best company and the best people in the steel bending industry, call Albina!

Albina recently bent Tube Steel 5" X 3" X .375" WALL A500 GR B and Tube Steel 6" X 4" X .375" WALL A500 GR B, all bent the easy way, to create the new lighted marquee at the Moda Center. The Moda Center is the home of the NBA's Portland Trailblazers. The bent tube steel was used to create the following letters: O, A, E (2), C, D. In addition to the marquee outside, we also bent to the tube steel that provides the base to the jumbotron scoreboard that hangs above center court.

Albina bent and fabricated various structural materials to create the floor supports for a custom tree house in Sammamish, Washington. Materials used included: a) 3-1/2" Sch80 and 5" Sch80 Bare Pipe fabricated complete per drawings with brackets cap welded to ends b) 1/2", 3/4" and 3/8" Rolled Plate c) Tube Steel 8" x 4" x .250" Wall A500 GR B d) W6 x 15# A992 and W8 x 15# A992 Wide Flange

Albina Co., Inc. recently bent 64 lengths x 30 ft of Tube Steel 6” x 4” x .250” wall for some curved roof trusses for the Presidio Parkway Doyle Tunnel in San Francisco. Over 30,000# of material was bent the hard way to a 52 foot radius.

Albina Co., Inc. had the opportunity to feature several of their high-profile bent steel projects in many of the national trade publications during the month of February. NOMMA's (National Ornamental of Misc. Metals Association) Annual Buyers Guide features several spiral, circular and helical staircases using materials such as plate, pipe, tube and structural members. It also highlights some of the decorative gates, fences and signage that we specialize in. One new product that Albina is offering includes complete handrail kits. The handrails are bent and trimmed per the customer's drawing, the mid-rails trimmed and coped, and the assemblies are supplied as individual parts or fabricated complete! NOMMA Buyers Guide 2014 STRUCTURE Magazine's editorial focus for February is cold formed steel and bridges. Albina specializes in architecturally designed pedestrian bridges and walk-ways erected at transportation stations, universities, museums, large businesses, and state parks. Some projects featured include the Museum of Flight Pedestrian Bridge in Seattle, WA. and the Happy Hallow Zoo Pedestrian Bridge is San Diego, CA. STRUCTURE Mag February Ad

Albina was just awarded another project consisting of 1,050 pieces of 2" OD X .065" WALL 6061-T6 ALUM. These parts are being processed complete by Albina (cut, bent, trimmed, drilled and machined) and the work was moved to Albina from China because the customer required better quality and a more favorable lead-time. In addition, the customer was pleasantly surprised with the competitive pricing we were able to provide on the job. The lowest price should not be the main determining factor when choosing a steel bending contractor. See our "Why Curved Steel" section of the website to read about why you should choose Albina as you steel bending expert.

Albina Co., Inc. is providing 20,000# of 60 foot lengths of Tube Steel 16" x 12" x .625" bent the hard way to a 127'-5-1/2" Inside Radius.  We are also providing 20,000# of 40 foot lengths of Tube Steel 20" x 12" x .625" bent the hard way to a 121'-5-1/2" Inside Radius. Tower Two at One Rincon Hill will feature new condominium-size residences with stunning San Francisco Bay views, space and several amenities. Tower Two at One Rincon Hill is a LEED Certified Building. We are excited to be part of this project.