We spent Thanksgiving touring around the beautiful state of Arizona. We saw many of the beautiful sights in Sedona and even went to visit the Grand Canyon. One of the highlights of the trip was our stop at Sloan Park, home of the Chicago Cubs Spring Training. We were anxious to see the field, but equally as excited about getting some pictures of the 50,000 pounds of steel we bent for some custom gates that sit above the stands at the park. The gates hold the overhead field lights. We bent various materials for this project including: W6 X 15# A992. 80 pcs total. Bent the hard way to a 8’-9” radius. C6 X 8.2# A36. 42 pcs total bent flanges in to a 10 ft radius. WT8 X 18# A992. 4 pcs stem out and 6 pcs stem in bent to a 10 ft radius and to a 56 ft radius. TS 3" X 3" X .188" WALL A500 GR B. 30 pcs bent to a 4’-4” radius and 17 pcs bent to a 11’-6” radius. 4" X 3" X ¼" ANGLE A36. 20 pcs total. Some rolled leg in and others leg out. All pcs were bent to a 95 ft – 105 ft radius. 7" X 4" X 3/8" ANGLE A36. 7 pcs rolled leg in and 1 pc rolled let out. All pcs were bent to a 10 ft – 90 ft radius. MC6 X 18# A36. 4 pcs rolled the hard way to an 11 ft radius. TS 6" X 6" X .250" WALL A500 GR B. 3 pcs rolled to an 11 ft radius. 8" X 8" X ½" ANGLE A36. 3 pcs rolled let out to a 52 ft radius. 