Blog posts tagged with 'Elbows'

Need duct component parts? Albina is the largest distributor of angle flanges west of the Rocky Mountains! Over the last few months, Albina has supplied thousands of angle rings in various diameters and out of various material sizes all for the Intel project in Oregon. If you have the need we will have the stock! Give us a call, we will help you connect your ducting. Stocked items (angle rings, plate flanges and cut-offs) can be ordered online for your convenience. These stocked items, as well as our non-stocked items, can also be ordered via phone, email or fax. Albina can drop ship Clamp Together Ducting and Standard Component Parts direct to your location. Albina's inventory helps local contractors save time and expense with standardized component parts. Stocked parts are available for immediate shipment which means you can complete your project on time without costly delays. Non-standard component parts can be ordered or fabricated upon special request.

If you answered yes, than you should consider wearbacks for your elbows. For decades, Albina has supplied customers with bent elbows where we weld a plate or channel to the outside of the bend (acting as the wearback). A wearback is installed to act as an additional layer to the bend, when the backside of an elbow finally is worn through, any materials running in the piping system will remain inside and the piping system will continue to function due to the extra layer of material on the backside of the elbow. We recently bent some 8" SCH80 T304L S/S SMLS to 30° elbows. After bending the elbows, we bent and fabricated wearbacks out of ½” stainless plate and welded the wearbacks to the outside of the pipe elbows.

As you know, Albina has had some changes with our suppliers regarding the elbows we supply. Many of our customers have expressed interest in the old K&B style elbows that were discontinued when K&B closed this segment of their operations. Albina is excited to announce we have found a supplier that provides the old K&B elbows at a much better rate than we were previously charging. These elbows will still ship direct from the factory, and will be delivered with the same level of quality you have grown accustomed to. We strongly urge you to log onto our website and review the updated pricing at www.albinaco.com. We are confident you will be pleased with the savings. If you are not currently set up with a username and password, please let Jason@albinaco.com know and he will set one up for you. Albina appreciates your business and we look forward to servicing your needs.