Category Archives: Square and Rectangular Tube Steel

Rolled Steel Front and Center at the Pacific Fleet Submarine Museum at Pearl Harbor

The Pacific Fleet Submarine Memorial Association operates USS Bowfin Submarine Museum & Park. It is the most visited submarine museum in the world. The museum aims to educate the public and honor veterans in a way that does justice to the brave men and women of the Silent Service. The USS Bowfin Submarine Museum & Park is undergoing a major improvement project and renaming itself The Pacific Fleet Submarine Museum at Pearl Harbor. In the video you can see one of the submarines in the bay. The ring resembles the hull of a submarine and will be featured as visitors enter the park. For more information and project renderings, click here. Albina bent the following materials for the project:

22,000# of rolled steel:
3 x 40 ft: TS 12″ X 6″ X .625″ WALL A500 GR B. Net 3 pcs rolled the Easy Way to a 21 ft radius.
2 x 35 ft: TS 10″ X 4″ X .375″ WALL A500 GR B. Net 2 pcs rolled the Easy Way to a 42 ft radius.
TS 12″ X 4″ X .375″ WALL A500 GR B. Net 18 pcs rolled. Some rolled the Hard way and others rolled the Easy way. Radii ranging from 13 ft to 231 ft.
TS 10″ X 6″ X .375″ WALL A500 GR B. Net 3 pcs rolled the Easy Way to a 24 ft radius.
W14 X 34# A992. Net 2 pcs rolled the Easy Way to a 24 ft radius.
4″ X 4″ X 3/8″ ANGLE A36. Net 4 pcs rolled the Leg Out to a 24 ft radius.

Check back soon for final installation pictures! They are going to be spectacular!

The Spheres Announced “Outstanding Project” Award Winner in 22nd Annual NCSEA Excellence in Structural Engineer Awards

The National Council of Structural Engineers Associations (NCSEA) recently announced the 2019 Excellence in Structural Engineering Awards in the December issue of Structure Magazine. The Rufus 2.0 Spheres in Seattle, WA. Was awarded the “Outstanding Project” for New Buildings $20 Million to $100 Million. We worked with some of our amazing partners in the PNW on this project! Albina’s portion included bending 750,000# and 1,050 pieces of rectangular tube steel bent the easy way and a portion bent off-axis for this project. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!

The Spheres Seattle, Washington

“The Spheres” Grace the Cover of Structure Magazine

“The Spheres”, the recipient of the AISC 2019 IDEAS2 Presidential Award for Excellence in Fabrication grace the cover of the August Issue of Structure Magazine! The article focuses on the inspiration, the vision and the design of “The Spheres.” Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis for this project. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! Numerous Pacific Northwest businesses collaborated to make The Spheres possible.

Curved Steel Sections of The Spheres Erected
Curved Steel Sections of The Spheres Erected
The Spheres in Seattle Washington
“The Spheres” Seattle, WA.

Difficult, Tight Bends Create Unique Curved Steel Vestibule Frames

Albina recently bent some Tube Steel 6″ X 3″ X .500″ WALL A500 GR B as double 90° bends to a 17″ inside radius the hard way. These are difficult, tight bends for this material and the bends turned out perfectly! The bends will be used as vestibule frames for a lobby entry.

Tube Steel 6" X 3" X .500" WALL A500 GR B as double 90° bends to a 17" inside radius the hard way for vestibule frames
Tube Steel 6" X 3" X .500" WALL A500 GR B as double 90° bends to a 17" inside radius the hard way for vestibule frames
Tube Steel 6" X 3" X .500" WALL A500 GR B as double 90° bends to a 17" inside radius the hard way for vestibule frames

“The Seattle Spheres” win Presidential Award for Excellence in Fabrication

The May 2019 Edition of Modern Steel Magazine features an article on the Seattle Spheres as they won the Presidential Award for Excellence in Fabrication! 


Albina Co., Inc. was the steel bender/roller for the Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!

Curved Steel Spheres
Curved Steel Spheres Seattle, WA.
Curved Steel Spheres Seattle, WA.

Elliptical Bends Provided for Universal Palms Hotel Pool Renovation

Albina recently bent 100 lengths of TS 2″ X 1″ X .125″ WALL 6061-T6 aluminum in elliptical configurations. All of the ellipse bends had to be within 1/8″ of the template provided and it was critical that all parts match each other. This was a rush project that was required just a few days after receipt of material. The ellipse bends will be used in the newly renovated pool at the Universal Palms Hotel in Florida. The hotel was recently purchased by a group of New York investors that plan to re-brand the hotel under the Choice Hotels franchise. 

Tube Steel Elliptical Bends for Universal Palms Hotel Pool-1
Tube Steel Elliptical Bends for Universal Palms Hotel Pool-2
Tube Steel Elliptical Bends for Universal Palms Hotel Pool-3

Curved Steel Roof Structure at Rainbow Recreational Center in Oakland, CA.

Albina recently bent 96,000# of steel consisting of 75 pieces of  TS10″ X 6″ X .500″ WALL A500 GR B and TS 10″ X 6″ X.625″ WALL A500 GR B bent the hard way for the curved Steel roof structure at the Rainbow Recreation Center in Oakland, CA. The renovation and expansion of the Rainbow Rec Center is a 13.7 million dollar project expected to be completed by Spring 2019.

curved steel roof structure rainbow recreational center-1
curved steel roof structure rainbow recreational center-2
curved steel roof structure rainbow recreational center-3

Another Phase of Work Completed for the Stanford ChEM-H & SNI Building

Albina recently finished another phase of work for the new Stanford ChEM-H & SNI Building located on the Stanford University Campus. This latest phase consisted of 35,000# of bent HSS (rectangular and square tubing).

Tube Steel 12″ X 2″ X .250″ WALL A500 GR B, bent the easy way down to a 15 ft radius (cold)
Tube Steel 20″ X 12″ X .500″ WALL A500 GR B, bent the easy way down to a 100 ft radius
Tube Steel 14″ X 14″ X .375″ WALL A500 GR B, down to a 15 ft radius (cold)

To see artist renderings of the project and to learn more about the building’s design please visit GGN’s (Gustafson Guthrie Nichol) website. GGN is a landscape architecture firm based in Seattle, Washington.

60,000# of Bent Steel for The Living Desert Zoo and Botanical Gardens in Palm Desert, CA.

We just finished a project for The Living Desert Zoo and Gardens in Palm Desert, California which consisted of over 60,000# of bent steel! This project consisted of AESS (Architecturally Exposed Structural Steel) material including both angle to rectangular tubing. The rectangular tubing ranged from 2” x 1” up to 16” x 8″! This is a great example of how well we can handle so many various sizes of material from the small to the big! We do it all! Another highlight of this project is that we were able to take the 10″ X 6″ X .375″ WALL A500 GR B Tube Steel to a 7 ft radius! A very difficult accomplishment.

Link to Article: Amazon Curved Steel Bio-Sphere Buildings Help Make Seattle America’s Biggest “Company Town”

Albina Co., Inc. was the bender/roller for the Amazon Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! See the most recent article published in the Seattle Times.