Blog posts tagged with 'plate rolls'

Albina Co., Inc. is a premier plate processing supplier for the United States and Canada.  Albina can source, cut, roll, bevel (end prep) and fabricate complete any plate project you may require.  Our plate roll allows us to bend up to 10 ft wide sections.  We can also bend up to 2” thick plate depending on the width of the section in question.  We have successfully provided bent and fabricated plate to countless industries and end uses, some examples include:   Tanks, Cones, Cylinders, Ducting projects (with Albina supplied Angle flanges welded to the ends), Gored Elbows, Column Wraps, Custom stair cases, Marine applications, Art Work, etc.  The requirements and applications for rolled plate are limitless.   We can take all of the hassle out of your project and be a one source supplier. You place an order and we will take care of everything else, including freight to your facility or job site.

Albina's Plate Rolling capacities range from 3/4" plate up to 10'0" in width (pre-bend up to 5/8" thick). For flat bar bent the easy way our capabilities include any thickness and size thru 4" x 22". The section is dependent on thickness to width. We recently completed a project consisting of rolled plate 1/2" thick x 120" wide. The plate was 216” in diameter and rolled to 180°.

At Albina Co., Inc., we have 70 years of experience in precision plate rolling. We roll a variety of metals, including carbon steel, stainless steel, aluminum, zirconium, hastelloy, copper, brass, and titanium. Our plate rolled metals are used for a variety of infrastructure and other applications, including casing cylinders, stiffeners, earthquake retrofits, concrete column wraps, transportation tunnels, bridge supports, underground waterways, and decorative structures. We fabricate plate rolled structures in thicknesses up to .75 in and diameters up to 10 ft. We supplement our plate rolling with a variety of additional services, including tube bending, HSS bending, structural steel bending, welding, end finishing, light fabrication, sandblasting, and painting. Our custom plate rolling serves many businesses, including those in the architectural, commercial construction, industrial, recreational equipment, food processing, military, heat exchanger, and transportation industries. Our work meets high industry standards set by the AISC, AESS, NOMMA, ASME, and NQA-1.

  Fabricated duct pieces created from rolled plate. The flanges were then welded on, the sections tacked back into the cylinders and then tacked together.  

Below is a picture of the final installation of the "Continuum Globe Project" for a Business Park in Arizona. The project was designed by Trademark Visual. Albina bent TS 12" x 8" x .375", TS 12" x 8" x .625" wall, 4" Sch40 pipe and various lengths of 1" plate for the custom sign. This picture was taken just before the final seal coat was applied to the "rusted" cradle portion. The steel erectors said that the components fit together nicely with no problems.