Tag Archives: Recreational Applications Requiring Bent Steel

Curved Steel at New Skate Park: “It is So Fun to Drop In!”

“It is so fun to drop in!” Sherwood Skate Park just opened and it is awesome! Filled with kids every day! Albina was thrilled to be a part of the project bending 4 lengths x 20 ft. Tube Steel 2″ X 2″ X .188″ WALL A500 GR B to a 42 ft radius and a 46 ft radius, as well as 3 lengths x 21 ft.: 2″ SCH40 A53B ERW bent to a 12 ft radius and a 5 ft radius, for the lip/rail that runs the perimeter of the park as well as for the benches kids sit and skate on.

skatepark rails
skatepark benches
skatepark rails
Tweet
Share
Share

We Have An Elevator Speech About Steel Bending!

Brian and I found ourselves in an elevator with Phil Knight, the co-founder and chairman emeritus of Nike, Inc., and we stood there in silence, when all we wanted to do was give him a 2 minute “elevator speech” about everything that is wrong with youth sports these days and how we wanted to partner with him to create a fun and positive environment for all kids involved in youth sports. We choked! But the good news is, if we were standing in an elevator with world-renowned architect, Frank Gehry, we would have a 2 minute elevator speech about Albina Co., Inc. and steel bending to blow his socks off!

Albina Co. is a small family-owned steel bending company founded in 1939. We are located in Tualatin Oregon (just south of Portland) and are able to service the entire United States and Canada from our single location!

If you have the opportunity to do business with Albina Co., Inc., I KNOW you will not be disappointed. Albina Co., Inc. is unique from other bending companies for a number of reasons:

•We have a full range of state of the art bending equipment allowing us to provide our customers with a one stop shopping experience for bending. We can bend any type of material (pipe, tube, plate and all structural members) and virtually any size of material (from the very small to the very large).

•When processing a job, generating a quote, or providing bending consultation we are looking to be part of YOUR TEAM and not just a vendor. Our staff is made up of experts that are not satisfied with “good enough”; our staff strives to exceed your expectations.

•For every job we process a knowledgeable project manager is assigned as your point of contact for the duration of your project. This project manager will always treat you with honesty and integrity and provide you with timely and accurate information.

•Every order we process will be confirmed back to you and it will be reviewed by two members of management (production and QC) BEFORE we start production. This ensures that the most accurate information is delivered to the shop for processing.

•We have developed our own custom in-house management software that helps us service you during every aspect of your project. In addition to our in-house management software we also offer bending calculators on our website to assist with complicated bending computations such as spiral bending math.

•Our customers are our best sales staff- we frequently hear from our customers that bent materials provided by Albina are in better condition, less distortion and dimensionally more accurate when compared to previous experiences with competitors.

We would love to partner with you on your next project. Do not let distance be a deterrent, consider us your “local” bending partner and see how working with Albina Co. is unmatched by other bending companies.

Tweet
Share
Share

2″ Sch 40 Curved Steel Bollards for Vehicle Control

Albina is your steel bending expert for large material as well as small material! We just finished a project that required 650 safety bollards. Bollards are thick, low posts, usually made of iron or steel for the purpose of diverting traffic from an area or road and also often used on a wharf for fastening mooring lines. This particular project was used for auto traffic diversion and the bollards were constructed out of 2″ SCH40 A53B ERW BARE, bent to a 6” center-line-radius x 180 degrees. We produce custom bollards for urban traffic and vehicle control, for fastening mooring lines, as barriers and barricades, for pedestrian security, for ornamental landscape structures and for unique bike rack solutions.

Tweet
Share
Share

Custom Curved Steel Bike Racks to Your Specifications

Albina has recently started making bike racks for a new customer. No matter the size or shape this customers knows that Albina will perform as promised. Albina can make racks from pipe, tubing (square / rectangular) and flat bar. The most recent project required 446 racks made out of Flat Bar 5/8″ X 2½” A36. Each rack needed to be cut, bent, trimmed to length and the ends required 1,784 pcs of welded rod to act as anchor pieces. This material needed to remain rust free to avoid the process of sandblasting after fabrication and before powder coating. Albina shipped all material to our shop tarped. All material was unloaded inside our facility with overhead cranes. Once unloaded, the raw material and finished product remained in our facility until it was time to ship to the powder coater (who is located across the street from our shop). Call us if you need a custom bike rack and need a dependable supplier that will meet your every need.

Tweet
Share
Share

Does Your Construction Project Require Bollards?

Albina just recently completed work on a project that required 252 pcs of 2” Sch40 A53B ERW pipe bent for bollards. Each “staple” bollard was bent on a 6” center-line-radius (a double 90° configuration). All parts were held to a +/- 1/8” center-center dimension and they had to avoid all moisture (they could not rust). To avoid rust, all raw material and then finished product were store inside our facility. Prior to loading on a truck all parts were placed on pallets and covered with shrink wrap to protect them from moisture.

Tweet
Share
Share