Albina Co., Inc. recently completed bending 27 pieces of 1¼” OD X .156″ WALL 4130 bent on a 4” radius. We were able to hold the threaded tangent dimension during the bending process.
The curved steel pipe will be used for “nose landing gear” on small planes.
We recently completed a very difficult job in which we bent 3″ OD X .065″ WALL T304 Stainless Steel POLISHED, 2½” OD X .065″ WALL T304 Stainless Steel POLISHED, and 1/2″ OD X .065″ WALL T304 Stainless Steel Polished for a manufacturing customer. The really tight bends in the picture below are elbows (butt-weld fittings) that are purchased off the shelf at a pipe supply house. The bends we did are the larger radii bends. Albina is a reliable vendor when it comes to producing bent parts for manufacturing applications. When applicable, we can provide same day and/or shutdown services which is a huge plus for customers that rely on equipment running 24 hours a day. Albina is also qualified to process NQA-1 work for certified NQA-1 shops.
Albina Co., Inc. recently bent 20 pieces of 3/8″ OD X .125″ WALL T304 S/S TBE that will be used on some water jet equipment. We coiled the material to a 8” diameter and bent the terminals on a 1½” center-line radius. We produce consistent, accurate and repeatable rolled metal parts and components for various manufacturing and industrial business sectors. We produce small parts such as hydraulic lines, handles, brake bands, pipe spools, boiler tubes, heat exchangers, and coils. Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports.
Albina Co, Inc. produces consistent, accurate and repeatable rolled metal parts and components for various manufacturing and industrial business sectors. We produce small parts such as hydraulic lines, handles, brake bands, pipe spools, boiler tubes, heat exchangers, and coils. Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports.”
We recently completed bending some component parts for a customer which were a mix of carbon steel and nickel plate, pipe and bar. In the first image, we bent the coil, the terminals, the cylinder and the cylinder stiffeners. In the second image, we bent the inner and out cylinders on the top half. On the third image, we bent the upper and lower cylinders. Our customer was so thrilled with the parts that we provided, we received the following email from them: “The components Albina did for us were fantastic! Please pass along to your guys that the items you guys made were just about perfect. It really helped the fabrication process go smoothly. We really appreciate the work you did on this project for us.”
Brian and I found ourselves in an elevator with Phil Knight, the co-founder and chairman emeritus of Nike, Inc., and we stood there in silence, when all we wanted to do was give him a 2 minute “elevator speech” about everything that is wrong with youth sports these days and how we wanted to partner with him to create a fun and positive environment for all kids involved in youth sports. We choked! But the good news is, if we were standing in an elevator with world-renowned architect, Frank Gehry, we would have a 2 minute elevator speech about Albina Co., Inc. and steel bending to blow his socks off!
Albina Co. is a small family-owned steel bending company founded in 1939. We are located in Tualatin Oregon (just south of Portland) and are able to service the entire United States and Canada from our single location!
If you have the opportunity to do business with Albina Co., Inc., I KNOW you will not be disappointed. Albina Co., Inc. is unique from other bending companies for a number of reasons:
•We have a full range of state of the art bending equipment allowing us to provide our customers with a one stop shopping experience for bending. We can bend any type of material (pipe, tube, plate and all structural members) and virtually any size of material (from the very small to the very large).
•When processing a job, generating a quote, or providing bending consultation we are looking to be part of YOUR TEAM and not just a vendor. Our staff is made up of experts that are not satisfied with “good enough”; our staff strives to exceed your expectations.
•For every job we process a knowledgeable project manager is assigned as your point of contact for the duration of your project. This project manager will always treat you with honesty and integrity and provide you with timely and accurate information.
•Every order we process will be confirmed back to you and it will be reviewed by two members of management (production and QC) BEFORE we start production. This ensures that the most accurate information is delivered to the shop for processing.
•We have developed our own custom in-house management software that helps us service you during every aspect of your project. In addition to our in-house management software we also offer bending calculators on our website to assist with complicated bending computations such as spiral bending math.
•Our customers are our best sales staff- we frequently hear from our customers that bent materials provided by Albina are in better condition, less distortion and dimensionally more accurate when compared to previous experiences with competitors.
We would love to partner with you on your next project. Do not let distance be a deterrent, consider us your “local” bending partner and see how working with Albina Co. is unmatched by other bending companies.
We recently received these pictures from our customer. They used our rolled steel materials to construct this “chute.” Albina rolled 6″ SCH40 A53B ERW down to a 12 ft radius (tightest) and also rolled 1/2″ A36 plate to fit to the laser cut plate on the face of the chute. We are hoping to get some pictures of the “chute” in action and will pass them along as soon as we do.
We are making custom boat parts out of 1″ OD X .065″ WALL 6061-T6 ALUM material. Our customer needed 850 parts made for this one project. Each part was bent on a 2½” center-line radius to 90 degrees. Each part had one end flared to 37°. All parts needed to be supplied in a T6 condition upon completion and be anodized for a clean surface condition. Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports.
Albina Co., Inc. is not just a structural steel bending shop! Some of our biggest customers are manufacturing companies that require bent material and repeat jobs of small parts. We recently finished a project that required some complex tube bends on our CNC draw bending equipment out of the following materials:
136 pieces of 1″ OD X .065″ WALL T304 S/S bent to a 2½” center-line radius.
136 pieces of Tube Steel 1″ X 1″ X .083″ WALL T304 S/S bent to a 3½” inside radius.
68 pieces of ½” OD X .049″ WALL T304 S/S bent to a ½” center-line radius.
All parts were cut, bent, washed and packaged by Albina Co., Inc. for shipment. Prior to shipping all parts needed to be free of dirt, debris and oil.
Not all bridges are designed out of bent steel, however, most bridges DO require bent components. One such component, required on both retrofit or new bridge construction, is what is known as a bridge drain elbow. Albina is bending 6” Sch10 material on a new bending machine with new bend tooling for a Caltrans project. The bridge drain pipes we are supplying are 52 pieces in total that we are bending to a 18” center-line-radius (a 3d bend) at 90°. We are working closely with our customer to meet the tight Caltrans delivery requirements for this project. Stay tuned for some images of this project!
