Albina recently bent various materials including tube steel, flat bar, pipe and angle for the Calvary Chapel in Ontario, Oregon. The Calvary Chapel is right on the Idaho border. Our bent material helped to create a lovely curved steel canopy for the chapel.
Materials Bent Include:
TS 10″ X 3″ X .375″ WALL A500 GR B (7 lengths x 48 ft- bent the hard way to a 66 ft radius).
FB ½” X 4″ A36 (2 lengths x 20 ft- bent the hard way to a 66 ft radius).
8″ SCH40 A500 GR B (1 length x 42 ft).
TS 6″ X 2″ X .188″ WALL A500 GR B (5 lengths x 48 ft).
1″ X 1″ X ¼” ANGLE A36 (6 lengths x 20 ft).
We recently completed bending some component parts for a customer which were a mix of carbon steel and nickel plate, pipe and bar. In the first image, we bent the coil, the terminals, the cylinder and the cylinder stiffeners. In the second image, we bent the inner and out cylinders on the top half. On the third image, we bent the upper and lower cylinders. Our customer was so thrilled with the parts that we provided, we received the following email from them: “The components Albina did for us were fantastic! Please pass along to your guys that the items you guys made were just about perfect. It really helped the fabrication process go smoothly. We really appreciate the work you did on this project for us.”
Albina Co., Inc. recently bent 3/8” solid bar coiled to create 54 total springs to a 6” center-center diameter on pitch and also bent the required terminals. The coils will be used for a footwear display to help show the “springiness of the manufacturer’s shoes.”