Blog posts tagged with '#bendingtherules'

The Bruneau Dunes State Park Observatory in Bruneau, Idaho. Bruneau Dunes Observatory is home to the largest telescope available for public viewing in Idaho. The observatory also offers astronomy presentations, tours, telescope, and solar viewing throughout the year. There are also countless of outdoor activities offered at the park including hiking the dunes, horseback riding, fishing, camping, biking, and more. They even have “the tallest single-structured sand dune in North America”!
For the observatory, Albina bent:

TS 12” X 6” X .375” WALL A500 GR B
2 pcs rolled the Easy Way to HSS standards at a 9’-7” inside radius

3” X 3” X 3/16” ANGLE A36
2 pcs rolled Leg Out to a 10’-1” inside radius
2 pcs rolled Leg Out to a 42’-10” inside radius

Information found at:
https://parksandrecreation.idaho.gov/state-park/bruneau-dunes-state-park/

Check out these curved handrails Albina did for 4 different apartment complexes located near Salem, Oregon. For these projects Albina bent 2,476 pcs of pipe to a 3” radius, and coped 6,437 pcs, totaling 8,913 pcs! You could say that Albina is apartment handrail bending experts!
 
The Grove Apartment Complex
1¼” SCH40 A53B ERW UNCOATED
2292 pcs - 591 pcs bent to a 3” radius, 1,701 pcs coped
1¼” SCH40 A500B UNCOATED
208 pcs - 120 pcs bent to a 3” radius, 88 pcs coped
 
Crawford Crossing Apartment Complex
1¼” SCH40 A53B ERW UNCOATED
56 pcs – 28 pcs bent to a 3” radius, 28 pcs coped
1¼” SCH40 A53B ERW WHEELED
1144 pcs – 337 pcs bent to a 3” radius, 807 pcs coped
 
Jory Apartment Complex
1¼” SCH40 A53B ERW WHEELED
1236 pcs – 495 pcs bent to a 3” radius, 741 pcs coped
1¼” SCH40 A53B ERW WHEELED
1968 – 328 pcs bent to a 3” radius, 1,640 pcs coped
 
Southtown Apartment Complex
1¼” SCH40 A53A UNCOATED
2009 pcs – 577 pcs bent to a 3” radius, 1,432 pcs coped

The Phil and Penny Knight Campus for Accelerating Scientific Impact at the University of Oregon consists of 2 buildings containing collaborative labs, classrooms, and an innovation center. The labs are designed as relaxing, stimulating environments encouraging teamwork and innovation. The building was full of friendly people and lots of advanced technology! On our tour we saw the 3 spiral staircases, and the sky bridge that Albina did the bending for. For the stairs Albina bent 8 pcs of 2” Thick X 8” Wide A572 GR 50 Plate, 8 pcs of 2” Thick X 8” Wide A572 GR 50 Plate (with stitch cuts), and 16 pcs of 1” Thick X 8” Wide A572 GR 50 Plate (with stitch cuts). For the sky bridge Albina bent 22″ OD x 1″ Wall Carbon Steel Pipe to a 105 foot center-line radius. The bridge spans Franklin Boulevard and serves as a connector between campus and other U of O research facilities. Next time you are in Eugene, be sure to check out the Knight Campus! 

Albina was honored to be a part of Curtis Pittman’s “Be the Light” sculpture for the Sandy Springs, Georgia Veterans Memorial. The sculpture stands at 30 feet tall and represents the cities gratitude toward their veterans. The park where the piece is located gives thanks to men and women who served in all branches of the military and hopes to inspire future generations as well. The sculpture also was installed with lights so once it is dark outside, it will glow.

For this project Albina bent 57 different segments of material.

CH 1” X 1” X 1/8” 6063-T52 ALUM
28 pcs bent to customer supplied instructions, radii ranging from 4ft to 16ft.

4” OD X .313” WALL A500B
15 pcs bent to customer supplied instructions, radii ranging from 8 ft to 15 ft.

2½” SCH40 A53B ERW
10 pcs bent to customer supplied instructions, radii ranging from 3 ft to 7 ft.

3” SCH40 A53B ERW
4 pcs bent to customer supplied instructions, radii ranging from 5 ft to 11 ft.

Photo Credit to Curtis Pittman (www.curtpittman.net)
Additional information from (https://www.sandyspringsga.gov/news/city-invites-community-honor-veterans)