Tag Archives: curved steel roof trusses

Murray Park Amphitheater Rennovations Include Curved Steel Roof Structure

Albina bent 55,000# of wide flange W24 X 76# A992, W30 X 108# A992, W36 X 135# A992, W36 X 170# A992 for the Murray Park Amphitheater in Salt Lake City, Utah. Over a planning period that lasted several years, the city received input from patrons and citizens that focused on the needs and wants for improvements to the amphitheater. The largest improvement to the amphitheater was a curved steel roof over the stage and orchestra pit. “In the summer, we have microburst storms that roll in at around three or four in the afternoon and rain out events,” Sorenson said. “The stage can also get very hot, which limits what you can do in the afternoon. If we had a roof, we wouldn’t have to cancel. It would allow us to keep events running.” One of Albina Co., Inc.’s slogans over the years is “We’ve Got You Covered” and in this instance, we truly did! The wide flange was all bent the hardway to a radii range of approx. 90 ft – 100 ft. and it was all bending to AESS (Architecturally Exposed Structural Steel Standards).

Murray Park Amphitheater Curved Steel Roof Structure

Murray Park Amphitheater Curved Steel Roof

Tweet
Share
Share

Curved Steel Roof Structure Creates Key Architectural Feature of “Serenity” Carmel, CA. Home

$11 million Carmel, California ‘Serenity’ house for sale! Back in 2012, Albina bent wide flange W12 x 30#, W12 x 26# and W12 x 50# to help create the amazing exterior of this home. We bent 42 pieces the hardway to various radii as tight as 116 feet. The 2667 square foot home sits atop a cliff in Carmel, in central California. The exterior takes inspiration for its curves from the butterfly. The curved steel of the exterior has a unique effect on the interior spaces, making for interesting corridors and seating areas. I have several images of the project in process below, and I am working on securing the listing images and will post them as soon as I can. Until then, click on the following link to enjoy looking at the stunning images of a Butterfly-Inspired House on the California Coast!

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Tweet
Share
Share

Curved Steel for the Fort Worth Multi-Purpose Arena in Fort Worth, Texas

We just finished a project for a new customer out of Texas. Albina Co., Inc. provided 40,000# of bent steel for the Fort Worth Multi-Purpose Arena project in Fort Worth, Texas which broke ground on April 18th. Albina provided 28 pieces of spiral bent Tube Steel 8″ X 4″ X .500″ WALL A500 GR B the easy way to AESS (Architecturally Exposed Structural Steel) standards. The tightest section was bent to a 17 foot radius. The Fort Worth Multipurpose Arena will be a 14,000-seat, multipurpose venue owned by the City of Fort Worth. The state-of-the-art arena, scheduled to open in November 2019, will host concerts, sporting events and family entertainment, and will be the new home to Fort Worth Stock Show Rodeo performances.

Tweet
Share
Share

Another Phase of Work Completed for the Stanford ChEM-H & SNI Building

Albina recently finished another phase of work for the new Stanford ChEM-H & SNI Building located on the Stanford University Campus. This latest phase consisted of 35,000# of bent HSS (rectangular and square tubing).

Tube Steel 12″ X 2″ X .250″ WALL A500 GR B, bent the easy way down to a 15 ft radius (cold)
Tube Steel 20″ X 12″ X .500″ WALL A500 GR B, bent the easy way down to a 100 ft radius
Tube Steel 14″ X 14″ X .375″ WALL A500 GR B, down to a 15 ft radius (cold)

To see artist renderings of the project and to learn more about the building’s design please visit GGN’s (Gustafson Guthrie Nichol) website. GGN is a landscape architecture firm based in Seattle, Washington.

Tweet
Share
Share

Explore “The Spheres” Online Now!

Building The Spheres was a project that began in February 2013 and just this month The Spheres will officially open. Numerous Pacific Northwest businesses collaborated to make The Spheres possible. The Spheres website is officially live and you can explore not only the building and the many milestones during conception and construction, but also the very unique plant life that inhabits The Spheres. Albina Co., Inc. was the steel bender/roller for the Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!

Amazon Curved Steel Spheres

Amazon Curved Steel Spheres

Curved Steel Spheres

Tweet
Share
Share

Bending BIG Beams for the Murray Amphitheater in Murray, Utah

Got big beams to bend? Look no further than Albina Co., Inc.! We are just finishing up a beam bending project for the Murray Amphitheater in Murray, Utah. Murray Arts in the Park provides a summer full of artistic entertainment. The evening subscription series usually opens in late May and runs through Labor Day in the Murray Park amphitheater. This project consists of 55,000# of bent wide flange the hard way. All wide flange beams were bent to a radius that is tighter than 100 ft.

The list of beams consist of:
W24 X 76# A992
W30 X 108# A992
W36 X 135# A992
W36 X 170# A992

Albina will not shy away from any work (within our capacity) because it might be difficult to bend. We thrive on the difficult projects that others can’t do! Stay tuned for final installation pictures.

Tweet
Share
Share

Curved Steel Roof Trusses for Utah Residence

Have you ever thought about what you would like your dream home to look like?  Have you ever thought of using curved structural steel roof trusses on that dream home to give it that unique look and structural integrity? We just recently completed rolling 30,000# of 10″ X 2″ X .250″ WALL A500 GR B tube steel bent the hardway down to a 35 foot radius and 16″ X 4″ X .375″ WALL A500 GR B tube steel bent the hardway down to a 56 foot radius for a residence in Utah. If you are looking to design a custom home and want to learn about the benefits of using curved steel on your project, call Albina for more details.

Rolled Tube Steel 10" x 2" x .250" and 16" x 4" x .375"

Rolled Tube Steel 10″ x 2″ x .250″ and 16″ x 4″ x .375″

Curved Steel Roof for Personal Residence

Curved Steel Roof for Personal Residence

Tweet
Share
Share

Updated Pictures for Curved Steel Spheres in Seattle, WA.

The erection of the curved steel “Spheres” in Seattle, Washington is complete. Check out the completed pictures below. As a reminder, Albina’s scope of work included approximately 750,000# and 1.050 pieces of rectangular tube steel bent the easy way and a portion bent off-axis. The material was bent to tight tolerances and bent to AESS standards. The amount of welds and grinding was significant, but thanks to Albina’s ability to bend portions of the project, a significant amount of welding and grinding was avoided. Almost NO correction was needed during fabrication or erection as the bends fit to fixtures (fabrication) within 1/32nd of an inch! Check back for more pictures as the project progresses!

Curved Steel Spheres

Curved Steel Spheres

Tweet
Share
Share

Albina Co., Inc. Bends Curved Steel Roof Trusses for Residential Construction

Are you looking to build a new home or do a remodel to make your home stand out from the rest?  Think about using curved steel beams to give your roof line a unique, eye catching look.  Not to mention, the structural integrity of the curved steel beams is unparalleled when compared to other building materials.

Albina Co., Inc, recently completed a project for a personal residence in California that involved splitting wide flange W12 X 30# A992 into WT6 X 15# and rolling stem in to a 75 ft radius. Albina also rolled tube steel TS 10″ X 6″ X .500″ WALL A500 GR B the hardway to a 75 ft radius and wide flange W10 X 30# A992 the hardway to a 75 ft radius to create the curved roof trusses.

Curved Steel Roof Trusses for Residential Construction

Curved Steel Roof Trusses for Residential Construction

Curved Steel Roof Trusses for Residential Construction

Curved Steel Roof Trusses for Residence in California

Tweet
Share
Share

Look Around: We’ve Got You Covered

When people ask me what I do and where I work, I get excited to tell them the answer because it almost comes as a surprise when I describe what our company does. When I say, ” I work for a steel bending and fabrication company” many people look at me inquisitively and ask “so what does that mean?” Since many of the products we make require someone to look above eye level, my common response is “next time you are outside, look up, look around, any time you see bent steel on a canopy, a roof truss, a store front…those are the kinds of things we make.” Many people go as far as to comment, “I never really thought about the fact that the steel has to be bent somehow!” So next time you look up and see a curved steel structure, think of Albina. “We’ve Got You Covered!”

Tweet
Share
Share