Tag Archives: bending beam the hard way

Curved Steel Roof Structure Creates Key Architectural Feature of “Serenity” Carmel, CA. Home

$11 million Carmel, California ‘Serenity’ house for sale! Back in 2012, Albina bent wide flange W12 x 30#, W12 x 26# and W12 x 50# to help create the amazing exterior of this home. We bent 42 pieces the hardway to various radii as tight as 116 feet. The 2667 square foot home sits atop a cliff in Carmel, in central California. The exterior takes inspiration for its curves from the butterfly. The curved steel of the exterior has a unique effect on the interior spaces, making for interesting corridors and seating areas. I have several images of the project in process below, and I am working on securing the listing images and will post them as soon as I can. Until then, click on the following link to enjoy looking at the stunning images of a Butterfly-Inspired House on the California Coast!

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Need Curved Steel for a Bridge Project?

Bridge bending? Yes- we bend steel for anything, even bridges! In fact every month steel is leaving our yard for different steel bridge projects. We recently finished bending steel for two bridge projects located on opposite ends of the United States. The first project shipped to Maine and consisted of 12,000# of HSS (rectangular and square tubing). Sizes ranged from TS 8” x 8” x .375” wall to TS 14” x 14” x .375” wall. The second project located in California (a week later) was for 21,000# of W33 X 118# A992 bent the hard way. We can provide bending needs for east coast and west coast projects!

Curved Steel Wide Flange for the UC Health Highlands Ranch Hospital

Albina recently worked with a loyal customer out of Colorado on the UC Health Highlands Ranch Hospital. The new 85,000 square foot hospital is being built as a proactive approach to the projected 25%+ population increase by 2025 for this growing area of Colorado. Albina needed to bend and ship 40,000# of bent steel to meet a critical project schedule. Albina was able to finish and ship the project days before the required date, once again exceeding customer expectations!

The materials on this project consisted of:
W12 X 26# A992
W12 X 14# A992
W16 X 36# A992
W14 X 22# A992
W14 X 30# A992
W16 X 26# A992
W18 X 40# A992
W18 X 35# A992

All bent the Hard way!

Bent Steel Tunnel Supports for an Arizona Customer

Albina can SUPPORT all of your steel bending needs. We were recently awarded a project to provide tunnel supports for a customer out of Arizona.
We are processing 40,000# of bent steel tunnel supports for this particular opportunity. The project is being bent out of 60 ft lengths of wide flange W8 X 67# A992. We are providing AESS quality bends for all 45 pieces we are supplying. Each bend is to an 11’ radius the hard way. If you need a steel bending company to SUPPORT your needs, look no further than Albina!