Close
You have no items in your shopping cart.
Search

Albina is able to offer the following elbows direct from the factory (these are not stock items for Albina).

Elbows available from the factory include 30°, 45°, 60° and 90° elbows with 1D, 1.5D radius or 2.5D radius options, in sizes 3" through 24" diameter. Galvanized steel with tight seams and smooth interiors for quiet, efficient airflow. Elbows can come with rolled lip ends, plain ends or flanged ends (see image in the gored/segmented section).

IMPORTANT NOTE: You must specify "end type" at checkout from the dropdown menu for each elbow ordered.

Note: images are representative of type of elbow, not necessarily degree or D of bend, etc.

Gored / Segmented, Plain End

Gored / Segmented, Rolled Lip

Stitch Welded, Plain End

Stitch Welded, Rolled Lip

Tubed, Plain End

Tubed, Rolled Lip

3 Items in Grid 4 Items in Grid List

4" 16ga, 45° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 45° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct

4" 16ga, 90° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 90° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct

5" 14ga, 45° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 45° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct

5" 14ga, 90° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 90° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct

6" 16ga, 45° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 45° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct

6" 16ga, 90° x 1.5D Tubed Elbow

Part Type: Elbows - Tubed 90° (1.5000)

Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.

* not stocked - available factory direct
* not stocked - available factory direct