12" 22ga, 90° x 1.5D Stitch Welded Elbow
Part Type: Elbows - Stitch Welded 90° (1.5000)
Stitch-welded elbows, or stitched halves, are galvanized metal elbows that are stamped out using mechanical presses and forming dies, resulting in a very tight elbow. The stamping process does limit the gauges that can be used with this kind of elbow, so when using larger sizes, the application should be limited to light dust or air.
* not stocked - available factory direct
Stitch-welded elbows, or stitched halves, are galvanized metal elbows that are stamped out using mechanical presses and forming dies, resulting in a very tight elbow. The stamping process does limit the gauges that can be used with this kind of elbow, so when using larger sizes, the application should be limited to light dust or air.
* not stocked - available factory direct
* not stocked - available factory direct
3" 16ga, 45° x 2.5D Tubed Elbow
Part Type: Elbows - Tubed 45° (2.5000)
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
* not stocked - available factory direct
3" 16ga, 90° x 2.5D Tubed Elbow
Part Type: Elbows - Tubed 90° (2.5000)
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
* not stocked - available factory direct
4" 16ga, 45° x 2.5D Tubed Elbow
Part Type: Elbows - Tubed 45° (2.5000)
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
* not stocked - available factory direct
4" 16ga, 90° x 2.5D Tubed Elbow
Part Type: Elbows - Tubed 90° (2.5000)
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
* not stocked - available factory direct
5" 14ga, 45° x 2.5D Tubed Elbow
Part Type: Elbows - Tubed 45° (2.5000)
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
Because they have no seam, tubed duct elbows are an excellent choice for paper trim and oil mist applications. Instead, these galvanized or stainless steel elbows are mechanically bent, resulting in a non-seamed tubing that can be fitted with a rolled-lipped collar or an angle ring flange.
* not stocked - available factory direct
* not stocked - available factory direct