Blog posts tagged with 'nomma1958'

The Hyatt Regency, located atop the Bethesda Metro station and minutes from downtown D.C., features an award winning staircase the newly reimagined lobby space. The Ernest Wiemann Top Job Contest is a peer-judged competition created to honor outstanding work. The staircase, fabricated by Emerald Ironworks, took home a silver Ernest Wiemann Top Job Contest Award in the "Commercial-Stairs Complete" category. 

The interior stringer of this "floating" staircase has five different radii. The stringers had to be clad in wood and the steps in Italian marble. Most impressive, ot steel stringers installed to within 1/32" tolerances. Materials bent for the staircase included:

TS 18" X 6" X .625" WALL A500 GR B

               1 pc spiral bent the easy way to a 143 ft plan view radius

               1 pc spiral bent the easy way to a 14 ft plan view radius

               1 pc bent the easy way to a 17 ft radius

TS 16" X 4" X .625" WALL A500 GR B

               1 pc spiral bent the easy way to an 18 ft plan view radius

               1 pc bent the easy way to a 21 ft radius

               1 pc bent the easy way to an 18 ft radius

TS 10" X 6" X .500" WALL A500 GR B

               1 pc bent the easy way to a 28 ft radius

               1 pc bent the easy way to a 19 ft radius

TS 20" X 8" X .625" WALL A500 GR B

               2 pcs bent the hard way to an 18 ft radius

               1 pc bent the hard way to a 15 ft radius

               1 pc bent the hard way to a 16 ft radius

See the full list of Ernest Wiemann Top Job Contest Entries. 

See the full list of Ernest Wiemann Top Job Contest Winners.

Albina Co. Inc. bent the spiral staircases at the newly renovated Space Needle in Seattle, Washington. The Space Needle's rotating glass floor, dubbed "The Loupe", is located just below the open-air observation deck and Albina Co., Inc. was the steel bender/roller for the custom spiral staircases connecting the two areas. The stair centilevers off concealed supports, so the staircase appears to float above the glass floor below thus creating a very unique experience for the visitors. 

Albina Co., Inc. bent 1" thick x 13 ¼" wide A572 GR 50 to yield three 180" pieces and three 144" pieces of rolled plate and 1" thick x 10-13/16" wide A572 GR 50 to yield one 80" piece of rolled plate. We also bent tube steel 10" x 6" x .625" WALL A500 GR B to a 11’ 6” inside plan view radius (the easy way).

More detailed information on the project can be found in the May 2022 Issue of Modern Steel. 

We were fortunate enough to be part of a unique urban renewal project in Dallas, Texas this year. We bent 30 lengths of 12" SCH40 (.406" WALL) 6061-T6 Aluminum material, a VERY rare material to get out of a mill, that were used to help create a unique overhead structure at the Pacific Plaza Pavilion in Downtown Dallas, Texas. Pacific Plaza is part of an urban renewal project transforming surface parking lots into neighborhood parks. Albina Co., Inc. bent, trimmed and marked top dead center on all parts. Material was bent to AESS standards and very tight tolerances.