Tag Archives: Off-Axis Steel Bending

Curved Steel Bent to a Complicated “S” Configuration for Simon Fraser University

Albina Co., Inc. recently bent 90 pieces of Tube Steel 8″ X 4″ X .375″ WALL A500 GR C the hardway to a complicated “S” configuration. The tightest “S” section that we bent was down to a 59” radius. All of the material was bent cold on our profile rolling equipment. This steel was shipping to a good customer in Canada to be fabricated and then installed at Simon Fraser University.

Efficient Bending of HSS for Jan Shrem and Maria Manetti Shrem Museum of Art at the University of California, Davis

Modern Steel recently interviewed our very own General Manager, Mark King, to help construct the recently published article “Above all, ART” that highlights the precise structural design and inspiring architecture of the Jan Shrem and Maria Manetti Shrem Museum of Art at the University of California, Davis. As a bender/roller, we were involved early enough in the process that we were able to reduce complicated curves, simplify the steel bending and reduce significant costs. The canopy consisted of HSS 14″ x 10″ rectangular tubing bent in multiple planes (both the easy way and the hard way). An important highlight of the project was that some of the material that was bent in multiple planes was rotated off-axis by a slight amount, and the radius was large enough, that we were able to bend it cold, which is a faster process than hot bending.

Curved Steel Roof UC Davis

50,000 Square Foot Permeable Roof

Curved Steel Roof UC Davis

Curved Steel Entry

Curved Steel Roof UC Davis

Overview of Curved Roof Structure

Link to Article: Amazon Curved Steel Bio-Sphere Buildings Help Make Seattle America’s Biggest “Company Town”

Albina Co., Inc. was the bender/roller for the Amazon Curved Steel Bio-Sphere buildings in Seattle, WA. Albina bent 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch! See the most recent article published in the Seattle Times.

Updated Pictures of Curved Rectangular Tube Steel Bio-Spheres Covered in Glass

See below for the most recent pictures of the curved steel bio-spheres in Seattle, WA. 750,000# and 1,050 pieces rectangular tube steel bent the easy way and a portion bent off-axis. Almost 8 miles of welding work and grinding was avoided because of Albina’s ability to bend a portion of the project. Almost NO correction was needed during fabrication or erection as the bends fit to the fixtures within 1/32nd of an inch!

Curved Steel Bio-Spheres Covered in Glass

Curved Steel Bio-Spheres Covered in Glass

Curved Steel Bio-Spheres Covered in Glass

Curved Steel Bio-Spheres Covered in Glass

Curved Steel Bio-Spheres Covered in Glass

Curved Steel Bio-Spheres Covered in Glass