Sponsored by the American Institute of Steel Construction, the Innovative Design in Engineering and Architecture with Structural Steel (IDEAS2) recognizes projects where structural steel has been utilized in an innovative manner. We have been an integral part of many award winning projects, but this year, our curved steel was featured on the award-winning project of the UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art.
In honor of this years award winners, the AISC produced a high quality coffee table flip Book of the winners. The UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art is featured on pages 39 and 40 Feel free to check out the whole book to see the entire list of winners.
The AISC (American Institute of Steel Construction) recently issued a press release announcing a dozen structural steel projects that have earned recognition in the 2018 Innovative Design in Engineering and Architecture with Structural Steel awards program (IDEAS2). Albina Co., Inc. was the steel bender of choice for the Merit Award winner UC Davis Jan Shrem and Maria Manetti Shrem Museum of Art, Davis, Calif. To read to full press release, please visit the AISC website. The AISC has also produced a YouTube video titled “IDEAS2 Awards FAQ” highlighting the main criteria for steel buildings that are considered as potential candidates to receive an IDEAS2 award.
Modern Steel recently interviewed our very own General Manager, Mark King, to help construct the recently published article “Above all, ART” that highlights the precise structural design and inspiring architecture of the Jan Shrem and Maria Manetti Shrem Museum of Art at the University of California, Davis. As a bender/roller, we were involved early enough in the process that we were able to reduce complicated curves, simplify the steel bending and reduce significant costs. The canopy consisted of HSS 14″ x 10″ rectangular tubing bent in multiple planes (both the easy way and the hard way). An important highlight of the project was that some of the material that was bent in multiple planes was rotated off-axis by a slight amount, and the radius was large enough, that we were able to bend it cold, which is a faster process than hot bending.
The Jan Shrem and Maria Maneeti Museum of Art at UC Davis opened in late November of 2016. Albina Co., Inc. was fortunate enough to be the designated AISC Bender/Roller on this project. Albina bent 38 lengths of tube steel 14″ X 10″ X .500″ WALL A500 GR B and 3 lengths of tube steel 14″ X 10″ X .375″ WALL A500 GR B for the complex project. All of the material bent the Easy Way, Hard Way and also compound bent the easy way AND hard way in the same length. The Fabricator on the project was Olsen & Co. Steel. SO-IL and Bohlin Cywinski Jackson designed a 50,000 square-foot permeable roof that covers both the site and the building. The canopy is composed of 910 triangular, honed aluminum infill beams. assembled in an intricate pattern, the structure seeks to evoke the patchwork texture and topology of the surrounding landscape. The canopy arcs as high as 34 feet on the freeway side, and dips as low as 12 feet at its front. The Museum is currently nominated for an AISC 2017 IDEAS2 Award.