Category Archives: New Bending Machines

Our Davi- MCP30 Master Bender Machine Has Arrived!!!

Our new machine is up and rolling! This master bender machine offers the new and innovative iRoll camera system, allowing operators to view the part being bent compared to a radius template on the control screen. This is a new way to make quality and consistent parts. Another innovation with the master bender is the machine’s ability to “learn and remember” how different materials bend, where the rolls need to be positioned, and how much spring back is associated with a bend / material.

This machine is a great fit for our shop, its size puts it right between our current Roundo R7 and R11 machines. Allowing us to reallocate work from two machines to three machines which should certainly help with our scheduling flexibility.

The MCP30 will allow us to bend up to 8” x 8” angle, 9” square HSS, W16 the easy way / W12 the hard way and 14” Sch20 pipe / 12” Sch40 pipe.

Davi Master Bender

Davi Master Bender

Davi Master Bender

New 2″ and 3-1/2″ Capacity Draw Bending Machines!

Our capacities keep on expanding with the arrival of two new machines! We just received new 2″ and 3-1/2 capacity draw bending machines. Rotary draw, or compression bending occurs when material is bent by rotating it around a bend die (and typically pulled or pushed over mandrel rod). A bend die is formed to fit a specific material size/type and at a specific diameter to fit the bend requirements. The material to be bent is clamped to the bend die and then is drawn, or pulled, around the bend die until the desired degree of bend is met. This method produces clean, tight radii bends and is mainly used by manufacturers or industrial companies.

Rotary Draw Bending Machines

2″ Rotary Draw Bender

Rotary Draw Bending Machines

3-1/2″ Rotary Draw Bender

Two New Rotary Draw Benders Aid Quality and Repeatability!

When striving to be the best, you can never settle and should always explore opportunities to improve. Albina adopts the philosophy of continuous improvement in all aspects of our company. We are ALWAYS looking to make improvements in everything we do. The most recent improvement we are committing to is with some of our bending equipment. We are purchasing two new bending machines to allow us to provide parts to higher quality standards and provide for better repeatability.

The two machines we are purchasing are smaller rotary draw benders. The larger of the two machines will bend up to 3½” OD material while the smaller of the two machines will bend up to 2” OD material. We are very excited to bring these two machines to our already vast list of equipment.