Monthly Archives: September 2018

Gearing Up for Our 80th Anniversary in 2019!

We are hard at work planning lots of fun events and stocking up on lots of COOL Albina Company swag to prepare for the year-long celebration of our 80th Anniversary. We are in the planning stages of some great activities and events in order recognize all of our employees, customers and vendors that have helped us reach this milestone! We are also creating “The Museum” on site which will house one of the first ever pieces of equipment that Albina owned and used to bend materials. My Grandfather (John Smith) built our “Model-T” bending machine in the late 1930’s / early 1940’s utilizing the transmission and differential from a “Model-T” Ford. This machine was used to roll/bend various materials such as pipe, tube, square and rectangular HSS (hollow structural steel). The machine would pull material around a bend die resulting in a smooth radius finished good. The “Model-T” was in operation at Albina until the 1990’s when it was replaced by more efficient bending equipment.

We hope to have “The Museum” set up and ready for visitors after the first of the new year. Stop by to see us! We are happy to take you on a tour of our shop and show you the machine!

Bending Machine powered by Model T Ford Engine

Bending Machine powered by Model T Ford Engine

Do You Have Plans for SteelDay 2018?

SteelDay is just a week away on Friday, September 28th! Don’t forget to register for a SteelDay event near you at www.steelday.org/events. If you can’t get to a physical location, AISC is offering a free webinar titled “Birth of the Steel Skyscraper”.

This year marks the 10th Anniversary of SteelDay, the steel industry’s largest educational and networking function of the year. If you would like to look back at some of the past webinars offered by AISC from 2011-2017, please log on to aisc.org to check them out!

Bending Steel Angle Heel Up, Heel Out, Heel In, Leg In and Leg Out! Plus Bulb Flat!

We bend all sizes of angle that the mill produces, up to 8” x 8” x 1¼”. We can bend all types of angle as well; including aluminum, stainless and carbon steel. Carbon angle (mill produced) is classified as ASTM A36 resulting in a yield point (PSI) of 36,000 minimum. We bend all stock lengths as well as non-stock lengths. Stock lengths range from 20 to 40 feet. Angle is produced with equal legs and unequal legs. Unequal legs would measure differently on the horizontal leg versus the vertical leg. We have the ability to bend angle with the leg in, leg out, heel in, heel out and heel up. We also have the ability to bend bulb flat. Bulb flat is similar to angle with one of the legs cut down to a very short “stub”. We can bend bulb flat with the stem out and the stem in. We can bend all mill sizes produced up to 430 mm x 20 mm (16.93” wide x .787” thick). Bent angle can be used for many different applications. The most common application would be angle flanges which are full circles that are used to join sections of pipe together. Bent angle is also used for canopies, roof trusses and tunnel shoring applications.

Bent Steel Angle Leg Out

Angle Leg Out

Bent Steel Angle Heel Up

Angle Heel Up

“Hey Siri” Who Do I Call When I Have a Labor Shortage and Am Struggling to Keep Up With the Flow of Work? ANSWER: Albina Co., Inc. Can Help Service Your Needs!

Our industry is faced with a labor shortage right now and we know that many shops are struggling to keep up with the flow of work. In this case, don’t ask “Siri” for help, ask us! Albina Co., Inc. is fortunate to have a strong union labor force behind us with workers that are available to meet your IMMEDIATE NEEDS. If you have a rush project that you need to get done-WE CAN HELP! If you have spillover work you need assistance getting to your customer- WE CAN HELP! Why hire temporary workers that you need to train? Why not team up with Albina Co., Inc.? We can be an extension of your shop. Let us partner with you on such projects as:

Small Parts Bending

Handrails

Bike Racks

Supplemental Fabrication
(cutting, trimming, coping, end finishing, drilling, small part welding, etc.)

WE CAN WORK TO YOUR BUDGET NEEDS….you tell us where our price needs to be to meet your budget requirements and we will figure out a way to get it done at that price.
IF LEAD-TIME IS A CONCERN, HAVE NO FEAR….you tell us when you need it and we will allocate the crew required to meet your needs.

Supplemental Steel Fabrication

Supplemental Steel Fabrication

Supplemental Steel Fabrication