Monthly Archives: July 2018

Curved Steel Beer Taps at 10 Barrel Brewing in Bend, Oregon

We were recently floating the Deschutes River in Bend, Oregon and after a day of fun, we decided to go grab lunch and cool beverage at one of our favorite locations, 10 Barrel Brewing. As we looked at the menu, and admired the new remodel of the restaurant, we noticed the beer taps! We recently bent 1-1/2” OD x .065 wall T304 Stainless steel #4 finish. These are 90 degree bends on a 2-3/4” Center line radius. How exciting to see our work on display at such a hip location on Galveston Street!

Curved Steel Roof Structure Creates Key Architectural Feature of “Serenity” Carmel, CA. Home

$11 million Carmel, California ‘Serenity’ house for sale! Back in 2012, Albina bent wide flange W12 x 30#, W12 x 26# and W12 x 50# to help create the amazing exterior of this home. We bent 42 pieces the hardway to various radii as tight as 116 feet. The 2667 square foot home sits atop a cliff in Carmel, in central California. The exterior takes inspiration for its curves from the butterfly. The curved steel of the exterior has a unique effect on the interior spaces, making for interesting corridors and seating areas. I have several images of the project in process below, and I am working on securing the listing images and will post them as soon as I can. Until then, click on the following link to enjoy looking at the stunning images of a Butterfly-Inspired House on the California Coast!

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Curved Steel "Serenity" Home in Carmel, California

Curved Steel Handrail on the Vancouver Waterfront Walkway

We recently completed a handrail project for a walkway around the Vancouver, Washington waterfront park. The projected consisted of

12 pieces of 2½” SCH40 T304 S/S
18 pieces of 1¼” SCH40 T304 S/S
17 pieces of 2½” SCH40 A53B ERW
26 pieces of 1¼” SCH80 A53B ERW

We bend handrails for commercial, recreational, transportation and residential applications. Handrail Kits Are Available: Bent and trimmed per drawing, mid-rails trimmed and coped, assemblies supplied as individual parts or fabricated complete. Call us for your next handrail project!

Curved Steel Handrail on the Vancouver Waterfront Walkway

Curved Steel Handrail on the Vancouver Waterfront Walkway

“Meandering River Bridges” with Curved Steel Structures Highlight Phase 1 of the Newberg/Dundee Bypass in Oregon

Phase 1 of the Newberg/Dundee Bypass road in Oregon includes more than ten bridge structures, where the bypass crosses over creeks, wetlands, railroads, or travels over or under other local roads. The Corridor Theme is “Meandering River and Rolling Hills.” The theme includes an open form for bridge structures, which allows views for drivers under the structure and provides opportunities for smooth transitions into the surroundings. A “meandering river” concrete relief is stamped into the concrete railing and an ornamental “rolling hills” design is used where screening is required. That is where we come in! We rolled various tube steel to create the “rolling hills” on the bridges. We rolled:

16 lengths of tube steel 10″ X 4″ X .375″ WALL A500 GR B (30 pcs total) bent the hard way to 15 different radii from 9 ft to 158 ft.
9 lengths of tube steel 12″ X 8″ X .375″ WALL A500 GR B (16 pcs total) bent the hard way to 5 different radii from 28 ft to 58 ft.
19 lengths of tube steel 3″ X 3″ X .313″ WALL A500 GR B (56 pcs total) to 26 different radii from 5 ft to 200 ft.

Curved Steel for the Newberg/Dundee Bypass Bridges

6″ Pipe Bends for Steel Rings Displayed at Hulu Convention

We recently bent 6″ SCH10 A53A ERW rolled to a 4’ 0” radius. We were instructed to bend the material in 180° sections and the customer was then going to make them into full circles. It is our understanding that these rings will be hung from the ceiling, painted and wrapped in ribbon for a Hulu convention.

6" pipe bends