Monthly Archives: November 2017

Job Opening in the Steel Bending Industry! Apply Today!

Shop Helper Position Available!

Steel bending & fabricating company looking for a Shop Helper with 1 year experience. Position in a physically demanding industry. Must be able to lift 50lbs repeatedly & stand for 4hrs+ at a time. Must be willing to do all sorts of shop support tasks. Must be able to read, write and speak English to complete paperwork and communicate with co-workers. Basic math skills are required. Forklift and/or loading experience highly preferred but will train.

Previous experience in metal or construction industry preferred. Machines and Tools commonly used include brooms, dustpans, hoses trough, grinders, torches, banding equipment, band saws, overhead cranes & forklifts.

This is a full time position M-F. Union wage scale starting at $12.83.

DRUG TEST REQUIRED

Job Type: Full-time
Wage: $12.83 to $17.90 /hour
Call: (503) 692-6010 today if you are interested.

Bending 1″OD Aluminum for Custom Boat Parts

We are making custom boat parts out of 1″ OD X .065″ WALL 6061-T6 ALUM material. Our customer needed 850 parts made for this one project. Each part was bent on a 2½” center-line radius to 90 degrees. Each part had one end flared to 37°. All parts needed to be supplied in a T6 condition upon completion and be anodized for a clean surface condition. Our bent steel can be seen on various applications in the auto, marine, aviation, locomotive, agricultural and food processing sectors. Our bends are used on locomotive frames, boat frames, deck rails and even components for homeland security helping to protect our docks and ports.

AISC White Paper “More Than Recycled Content, The Sustainable Characteristics of Structural Steel”

As part of AISC’s (American Institute of Steel Construction) mission to make sure that architects and developers have accurate and factual information regarding the design and construction of buildings and bridges, they have created a series of white papers exploring various issues related to specifying steel as the primary building material on projects. The first one that I would like to highlight is “More Than Recycled Content, The Sustainable Characteristics of Structural Steel” which focuses primary on the fact that domestically produced and fabricated structural steel used for structural framing systems has an average recycled content of 93%. This white paper also addresses important environmental issues such as reuse, resiliency, water consumption, waste generation, energy consumption and more. Visit AISC for more detailed information and a link to read the full white paper. We also address many of these same issues on our own website in “Facts About Curved Steel.” and in our “Top 10 Reasons to Specify Structural Steel.”

Do You Want to Extend the Life of Your Industrial Pipe Elbows, Reduce Downtime and Maintenance Costs?

If you answered yes, than you should consider wearbacks for your elbows. For decades, Albina has supplied customers with bent elbows where we weld a plate or channel to the outside of the bend (acting as the wearback). A wearback is installed to act as an additional layer to the bend, when the backside of an elbow finally is worn through, any materials running in the piping system will remain inside and the piping system will continue to function due to the extra layer of material on the backside of the elbow. We recently bent some 8″ SCH80 T304L S/S SMLS to 30° elbows. After bending the elbows, we bent and fabricated wearbacks out of ½” stainless plate and welded the wearbacks to the outside of the pipe elbows.

Rolled Steel for Unmanned Aircraft Hangar

We have all heard about drones and how they may play a role in our future. Like it or not, drone technology is getting better and better and the areas of the business sector where they can and will play a large roll in the growth and development of certain areas of business. Albina has just finished rolling 50,000# of steel for a new UNMANNED AIRCRAFT HANGAR. For this project we rolled 6” angle, square tubing 3″ x 3″ and 6″ x 6″, as well as wide flange ranging from W8# to W18#. Stay tuned for some installation pictures in the near future.

Meet Brian and Jaime Smith- There is Always Something for Which to Be Thankful

We live in a very uncertain world right now, but we try to remind ourselves every day that “There is Always Something for Which to Be Thankful.” We can only control what goes on in our own little circles of life and it is more important now, more than ever before, to take the time to say “Thank You” to the people who have made an impact or impression on either our personal or professional lives. We are thankful….

For our Loyal Customers: We truly appreciate your business, and we’re grateful for the trust you’ve placed in us. We are looking forward to another strong year and continuing our joint efforts to add the functionality, beauty, and drama of curved steel to the building and manufacturing worlds!

For our Outstanding Vendors: We are thankful that we have such a strong vendor base to meet, and often times exceed, all of our daily business needs. We value the relationships we have spent years building and hope that 2018 brings continued new projects and growth.

For our New Customers: “Thank You” for giving us a shot to be your steel bender of choice! We hope that your experience was a positive one and that we can continue to service your steel bending needs at the highest level. We are thankful for you giving us the opportunity to show you what we can do for you.

For our Employees: Our employees are part of the Albina family and so many of us have been around for decades battling through the many ups and downs of our economy. We have a very strong team in place right now and we are ready to meet the challenges ahead whatever they may be. We are thankful and grateful for their dedication to the Albina family and the time and efforts they spend servicing our many wonderful customers.

We hope to have the pleasure of doing business with you for many years to come. Thank you for giving us the opportunity to serve you.

Meet Brian and Jaime Smith- There is Always Something for Which to Be Thankful

We are Thankful for the Opportunity to participate in the Consano Organization- A non-profit crowdfunding
platform for medical research. We got involved in the organization when my father, Bill ,was diagnosed with a
desmoplastic melanoma, that lead to his eventual passing in 2011. Albina is grateful to the Consano
Organization for all of their wonderful work!